Balay Dishwasher Error e18

What is the e18 Balay error problem that is affecting your dishwasher?

¡An error caused by various factors that you need to check! Undoubtedly, Balay brand dishwashers are excellent, but like any appliance, they are also prone to failure, and the error code E18 is here to remind you of that, and not in a very pleasant way, I must say.

The E18 error code on your Balay dishwasher is a combination of problems that can result from a lack of maintenance or improper prior installation. This type of error in your machine indicates that there may be an issue related to the water hose, faucet, or inlet filter. It is an error that can be caused by various factors, which we will explain below:

• Closed or calcified water faucet: The E18 error may be due to a closed water faucet or one that has a build-up of limescale. You may need to replace this faucet or perform the necessary maintenance on it.
• Clogged water filter: The dishwasher's inlet filter could be obstructed, preventing water from flowing through. You will need to thoroughly check it and perform maintenance or replace it if necessary.
• Issues with the water hose: The water hose could be bent, obstructed, broken, or damaged, which hinders the water supply to the dishwasher.

Fortunately, this E18 error code affecting your Balay brand dishwasher has a prompt and easy solution. It is completely repairable and does not mean that the new home for your dishwasher is the trash bin.

How to fix the Balay dishwasher error e18?

Below, we provide you with a list of possible solutions that you can try to fix the E18 error code on your Balay dishwasher yourself:

1. Restart the dishwasher: First, let's try restarting the machine to reset all its sensors and verify if the error persists. Disconnect the dishwasher from the power outlet, wait for a few minutes, and reconnect it.
2. Check the water faucet: Make sure that the water faucet is open and free from limescale buildup. If you want to ensure that the water flow is correct, it should be around 10 liters of water per minute approximately.
3. Inspect the water filter: Check if the dishwasher's inlet filter is clogged, and if necessary, clean it. If it is heavily deteriorated, you will need to find a replacement.
4. Inspect the water hose: Verify if the water hose is bent, obstructed, broken, or damaged, and correct the issue if necessary. The hose is crucial for the proper water supply to your dishwasher and should be in perfect condition.
5. Repeat all the previous steps if the problem persists: If the E18 error code continues to appear after performing the above actions, repeat the steps to ensure that you have not overlooked anything.
6. Contact qualified Balay technical support: If the E18 error still appears on your precious dishwasher after following the previous steps, contact the appropriate brand's technical support to assist you in resolving the problem. Sometimes, it's better to leave everything in the hands of a professional.

Summary: The E18 error code on a Balay dishwasher is caused by an issue related to the water hose, faucet, or inlet filter. To resolve it, you need to restart the dishwasher, check the water faucet, inspect the water filter, and, if necessary, examine the water hose. If the problem persists, repeat the mentioned steps, and ultimately, seek assistance from the corresponding brand's technical support.