Balay Dishwasher Error e19

What is the e19 Balay error problem that is affecting your dishwasher?

Do you have a Balay dishwasher and are experiencing the error code e19? You don't have to worry because in this article, we will explain the possible causes and solutions so that you can resolve this problem in the best possible way.

The e19 error code in the Balay dishwasher indicates a problem or malfunction related to the detergent dispenser you are using. Therefore, we can say that it is not a serious problem, but it can be quite annoying. This can occur for several reasons, including:

• Issues with the detergent dispenser: If the detergent dispenser is not functioning as it should, it can result in an e19 error.
• Issues with the detergent level sensor: If the detergent level sensor is not working correctly, it can cause the e19 error code.
• You are using too much soap: Excessive foam can be problematic. If the sensors detect too much foam in the system, it can generate the error.
• Issues with the dosing pump: If the dosing pump is not functioning correctly, it can cause this type of error and prevent the proper use of your dishwasher.

How to solve the Balay dishwasher error e19?

Fortunately, the e19 error code in the Balay dishwasher is not a serious issue and does not mean you have to replace your appliance. Here are a series of tips and solutions you can try to reset your machine and start using it again:

1. Restart the dishwasher: In many cases, restarting the dishwasher can solve the problem. To do this, simply turn off the dishwasher and disconnect it from the power source for a few minutes. Then, reconnect it and turn it on to see if the problem has been resolved.
2. Check the detergent dispenser: If the problem persists, check that the detergent dispenser is functioning correctly and that there are no issues with the internal components.
3. Verify the detergent level sensor: Check that the detergent level sensor is working properly and that there are no issues with it.
4. Use less soap: When using too much soap, excessive foam can cause incorrect readings in the sensors, resulting in the e19 error code appearing in your dishwasher system as a false positive.
5. Inspect the dosing pump: You can check the pump that dispenses and distributes detergent in your dishwasher. Make sure it is functioning correctly and does not have any issues.
6. Repeat all steps if the problem persists: If the problem persists after trying all the previous solutions, repeat all the steps to ensure there are no errors in the process.
7. Consult a qualified Balay technician: If the problem persists after trying all the previous solutions, it is recommended to consult a qualified Balay technician who can promptly and effectively resolve the e19 error code.