Balay Dryer Error e13

What is the e13 Balay error fault affecting your dryer?

Hello, today we are going to talk about the E13 error code on a Balay brand dryer. Do you know what this code means and how to solve it? If you don't, don't worry, because in this article we are going to explain everything you need to know about this common and annoying problem.

The E13 error code indicates that there is a problem with the dryer's water drainage. The good news is that this type of error is very simple to solve and it does not mean that you have to throw your dryer in the trash or anything like that. This type of error can be due to several causes, such as:

• A blockage in the drain pump filter: This filter is responsible for retaining lint and other objects that may obstruct the flow of water. If it is dirty or blocked, the water cannot exit correctly and accumulates inside the dryer.
• An obstruction in the hose or drain pipe: These elements connect the dryer to the home's drain. If they are bent, crushed, or blocked by some object, the water cannot flow and the E13 error code is produced.
• A failure in the drain pump: This piece is the one that drives the water from the dryer to the drain. If it is damaged or defective, it cannot fulfill its function and the water remains stagnant in the dryer.

How to fix the e13 error on Balay dryer?

Fortunately, this type of error can have a quick and easy solution. Here are the simple and easy steps to solve the issue and get your Balay dryer working again:

1. Restart the dryer: Sometimes, a simple restart can fix the problem. To do this, unplug the dryer from the electrical outlet for a few minutes and then plug it back in. Check if the E13 error code on your dryer has disappeared.
2. Clean the drain pump filter: To access the filter, you must open the bottom cover of the dryer and turn the cap that covers it. Remove the filter and clean it with water and soap. Remove all lint and objects you may find. Replace the filter and close the cover.
3. Check the hose and drain pipe: Make sure there is no obstruction or bend in these elements. If necessary, unplug the hose from the dryer and drain and clean it with pressurized water. Do the same with the drain pipe. Reconnect them properly.
4. Change the drain pump of your dryer: If the previous steps have not worked, it is possible that the drain pump is damaged and you need to replace it with a new one. To do this, you must disassemble the back of the dryer and locate the pump. Disconnect the wires and hoses that connect it to the dryer and remove it. Place a new pump and reconnect everything.
5. Repeat all the previous steps: If the problem persists, repeat all the previous steps, this time paying special attention to the details. If after changing the drain pump you still see the E13 error code, there may be some other serious problem with your dryer. In that case, we recommend that you review all the previous steps to make sure you have not missed anything.
6. Contact Balay's technical support to solve the problem: If none of the above has worked, it is best to contact the official Balay technical service to check your dryer and give you a definitive solution.

In summary, to solve the E13 error code on a Balay dryer you should:

• Restart the dryer
• Clean the drain pump filter
• Check the hose and drain pipe
• Change the drain pump
• Repeat all the previous steps if the problem persists
• Contact Balay's technical support to solve the problem

I hope this article has been useful and that you have been able to solve the E13 error code on your Balay dryer. If you liked it, share it with your friends and leave me a comment. Until next time!