Error AO2 Washer Bosch

What is the fault of the A02 Bosch error affecting your washing machine?

Have you encountered issues with your Bosch washer dryer, and an A02 error code has appeared on the screen? If so, don't worry; in this article, we'll explain what this error means and how you can easily and quickly resolve it.

The A02 error code on Bosch washers is not a malfunction per se; it's more of a warning that indicates the washer or dryer door is locked. This means the appliance is currently in use, and you need to wait for the cycle to finish before opening it. Several reasons can trigger this error code, such as:

• The washer and/or dryer has a security system that prevents opening the door when the drum is spinning or when there's hot water inside.
• The internal temperature of the dryer is too high, making it unsafe to open the door right away. This warning instructs you to wait.
• The washer and/or dryer detects an issue with the door latch or the sensor that verifies the door is closed correctly.
• There could be a malfunction in the PCB electronic board that affects the door's operation or the control panel.

Fortunately, this notice from your washer is more of a call to be patient. In other words, it's a reminder to stay calm and patient and let your appliance finish its job. Once the washer and/or dryer has completed its cycle, it will most likely allow you to open the door normally.

How to fix the A02 error in your Bosch washing machine?

As we've mentioned, this A02 error code issue doesn't necessarily mean there's a problem with your washer and/or dryer. It can be a waiting notification during the washing cycle. However, if your appliance is not in any cycle and displays this issue, keep reading, as we'll provide you with some tips to resolve it:

1. Wait for the washing or drying cycle to finish on the appliance: It's as easy as waiting for your appliance to complete its task. Wait for the washing and/or drying cycle to finish before opening the door and removing your laundry. Avoid rushing to open the door prematurely, as the washer and/or dryer could lock it for your safety.
2. Wait for the water to cool down before attempting to open the door: It's possible that the water temperature is not at a safe level. Don't force the door open or use objects to unlock it, as you might damage it or cause a water leak. Wait for the temperature to decrease to an acceptable level, then try to open it again.
3. Wait for the washer to finish draining all the water inside: If the washer is in the middle of the washing process, it means it has water inside, and the door will be locked. Wait for the washer to complete draining all the water, and only then will it allow you to open the door normally.
4. Wait for the internal temperature to decrease: Let the dryer rest for a while, as it's highly likely that the temperature during the drying process may have been excessive. You may need to wait a reasonable amount of time before you can open the door. Wait a few minutes for the temperature to decrease so you can open the dryer and retrieve your laundry.
5. Check that the door is properly closed and that there are no objects preventing it from closing: If the door is damaged or deformed, it may not make contact with the sensor, and the washer-dryer may not recognize that it's closed, or worse, it may not allow you to open it because the sensor is not making good contact.
6. Restart the washer-dryer to reset the sensors: Sometimes, excessive foam can disrupt the sensors. It would be convenient to ensure that the washer is internally clean and then perform a restart. To do this, disconnect the appliance from the power source for a few minutes and then reconnect it. Turn it on, wait for the control panel to light up, and check if the error has disappeared.
7. Repeat all the previous steps if the problem persists: If you have already restarted your Bosch washer-dryer, waited for it to finish all pending wash and dry cycles, and checked the condition of the door, but the A02 error code still appears, there may be a more serious problem with the appliance. However, try rechecking everything we mentioned earlier.
8. Seek assistance from Bosch's technical support to resolve the issue: If none of the previous solutions work, it may be necessary to replace a part or repair a component of the washer-dryer. In that case, it's best to contact Bosch's official technical support and request an inspection or repair. We are confident they will assist you and find a prompt and effective solution for your appliance.

In summary, the A02 error code may not be a malfunction in your Bosch washer-dryer. This code is more of an indicator that you need to wait for the washer to finish to open the appliance's door. It's simply a safety measure to protect you as a user. To make this notification disappear, we recommend, in a nutshell, following these steps:

• Wait for the washing or drying cycle to finish on the appliance
• Wait for the water to cool down before attempting to open the door
• Wait for the washer to finish draining all the water inside
• Wait for the internal temperature to decrease
• Check that the door is properly closed and that there are no objects preventing it from closing
• Restart the washer-dryer to reset the sensors
• Repeat all the previous steps if the problem persists
• Seek assistance from Bosch's technical support to resolve the issue