Error E63 Washer Machine Bosch

What is the fault of the Bosch E63 error affecting your washing machine?

Another error related to a failure in the electronic control board of your Bosch washing machine!

Washing machines are very useful and practical appliances that make our daily lives easier. Having a Bosch washing machine means you have a high-quality appliance, but sometimes, they can develop faults or breakdowns that prevent us from using them properly. One of these issues is the E63 error code, which indicates a problem with the washing machine's electronic control board (PCB module).

The electronic control board module is responsible for controlling and regulating the operation of the washing machine, as well as communicating with sensors and other components. If this module fails, the washing machine won't be able to complete its normal washing cycle and will display the E63 error code on the screen.

But what can cause the electronic control board to malfunction and display this error code? Here are the possible causes:

• A defect or damage to the electronic control board module: A blow, electrical overload, excessive moisture, or wear and tear from usage can lead to damage to the PCB module of your washing machine.
• A poor connection or wiring disconnection: Between the electronic control board module and the general wiring of the washing machine. You will need to inspect all of this wiring.
• An issue with the power supply: Unstable voltage, power outages, a faulty outlet, or a blown fuse can cause error codes to appear on your washing machine, including E63.
• An issue with the washing machine's sensors: They may be dirty, damaged, or misaligned, causing them to send incorrect signals to the electronic control board module.

How to fix the Bosch washing machine E63 error?

Error code E63 is a fault that can be solved, as long as you pay attention to the possible causes that cause it and make the right decision regarding the solution. solution you want to apply. We are going to leave you here a list of possible solutions that you can try to fix this failure yourself:

1. Restart the washing machine to reset the sensors: A general reset of your washing machine could help resolve this problem because the sensors reset after this procedure. To do this, turn off your washing machine and disconnect it from the electrical outlet for a few minutes. Now, reconnect it and turn it on to check if the error has disappeared. Sometimes, this is enough for the electronic control board module to recognize the sensors and clear the E63 error code.
2. Check the electronic control board module (PCB) with a multimeter: This is done by removing the back cover of the washing machine and locating the module, which is usually at the top. With a multimeter, you can check if the module has electrical continuity and if it is receiving the proper voltage. If the module is faulty or damaged, you will need to replace it with a new one.
3. Perform general maintenance on the electronic control board module (PCB): If you notice incorrect readings on the multimeter, try performing maintenance on the electronic control board. Check for signs of sulfation, burnt capacitors, bulging, or exploded components. Use an electronic cleaner and a soft-bristle brush to clean the entire board and reassemble it in your washing machine to check its operation.
4. Inspect the general wiring of the washing machine: This is done by following the cables that come out of the electronic control board module and checking if they are properly connected, clean, and free from damage. If there is any loose, disconnected, cut, burnt, scorched, or sulfated cable, you will need to replace it with a new one.
5. Check the electrical supply to your washing machine: Check the fuses in your home's circuit breaker panel and in your washing machine, and look for any abnormalities in the electrical voltage. If you notice any issues with the electrical supply, you will need to address them or find another power outlet to connect the washing machine to. Ensure that the voltage supplied to your washing machine is within the manufacturer's specified range.
6. Inspect the washing machine sensors: Locate the sensors, which are typically found at the bottom or sides of the washing machine, and clean them with an electronic cleaner to remove any dirt, soap residues, dried foam, or sulfate buildup. You can also check if the sensors are properly secured and have electrical continuity using a multimeter. If the sensors are damaged, you will need to replace them with new ones.
7. Repeat all the previous steps if the problem persists: Sometimes, it's necessary to perform multiple tests and adjustments to resolve the E63 error code. If the problem is not resolved after following all the previous instructions, you may need to repeat the process to identify the cause and solution. Don't see it as a waste of time; we recommend conducting a second check of all the steps we've provided earlier.
8. Contact Bosch technical support to resolve the issue: If none of the previous solutions work or if you lack the experience or necessary tools to perform them, it's advisable to contact Bosch's technical support and request a visit from a qualified professional. We are confident that by calling Bosch's technical support, you are in good hands, and your washing machine will receive the quality service it deserves.

To summarize our brief guide of tips: The E63 error code in Bosch brand washing machines indicates a problem with the electronic control board module of the washing machine. This module is responsible for controlling and regulating the operation of the entire appliance.

This issue can have several causes, such as a defect or damage to the module, poor connection or disconnection between the module and the wiring, an electrical supply problem, or sensor issues. To find a solution to this problem, you can follow the instructions provided below:

• Restart the washing machine to reset the sensors
• Check the electronic control board module (PCB) with a multimeter
• Perform general maintenance on the electronic control board module (PCB)
• Inspect the general wiring of the washing machine
• Check the electrical supply to your washing machine
• Inspect the washing machine sensors
• Repeat all the previous steps if the problem persists
• Contact Bosch technical support to resolve the issue