Brother Printer Error 50

What is the fault of Brother Error 50 affecting your printer?

An error that can be quite simple to fix! Do you have a Brother printer, and the Error 50 code has appeared on the screen? If so, don't worry because today we are going to explain what this error might mean, what its possible causes are, and how you can quickly and easily resolve it.

Error 50 is a mechanical problem that affects Brother printers, especially inkjet ones. This error indicates that there is some kind of obstruction or jam in the internal mechanism of the printer, preventing it from functioning correctly.

Among the possible causes that can lead to the appearance of Error 50 in Brother printers are the following:

• A paper jam inside the printer: This can occur if the paper is inserted incorrectly, low-quality paper is used, or an attempt is made to print too many sheets at once.
• An foreign object inside the printer: This could be anything from a clip, a coin, an eraser, or any other item that has fallen or been accidentally inserted into the paper feed slot or scanner.
• A problem with the print head or carriage: This could be due to wear, dirt, or a poor connection of these parts, which are responsible for moving the ink onto the paper.
• A problem with the printer's PCB electronic board or power supply: This could be caused by an electrical failure, a short circuit, or power overload affecting the internal operation of the printer.

Generally, this type of problem tends to occur in these printers when there is a lack of maintenance.

How to fix Brother printer Error 50?

Luckily for you, this type of failure can be fixed very easily. To do this, we have prepared for you a list of possible solutions that you can apply to fix error code 50 on your Brother printer:

1. Restart the printer and the computer to refresh the memory: Sometimes, a simple restart can be the solution to your problem. This is because the temporary memory of both the printer and the computer is cleared, and all default settings are restored. Turn off your printer and computer completely, wait for about 5 minutes, and then turn everything back on as if it were a normal day. Now check if the Error 50 code has disappeared from your Brother printer.
2. Remove any jammed paper or foreign object inside your printer: Turn off the printer and open the front cover. Carefully check for any paper or object obstructing the mechanism and gently remove it. You can use tweezers if you can't access the object with your hands, just be careful not to touch or damage any other components. You can also use compressed air to assist with this task. Refer to the user manual to learn how to disassemble the printer if necessary.
3. Clean the print head and the carriage where it slides: Turn off the printer and disconnect it from the power outlet. Use a soft, damp cloth to carefully clean the print head and carriage, removing any ink or dirt residue. If you have an electronic cleaner, that's even better. Do not use alcohol or abrasive products as they could damage the parts. Wait for everything to dry thoroughly before reassembling the printer, reconnecting it, and turning it back on.
4. Inspect the PCB electronic board and the printer's power supply: Turn off the printer and disconnect it from the power outlet. Open the rear cover and check for any signs of burning, breakage, or disconnection on the board or power supply. Use a multimeter, and if you have knowledge in electronics, thoroughly check that all components are functioning at 100%.
5. Repeat all the previous steps and make sure to follow everything precisely if the problem persists: Sometimes, it is necessary to repeat the process several times to resolve the error, especially if it is a severe jam or a difficult-to-locate obstruction. Make sure to follow everything precisely, and don't overlook anything. Check everything thoroughly, and you will likely find the solution to this problem. However, if the problem continues, then the issue might be more serious than anticipated.
6. Request a review of your printer from Brother's technical support: If after following all the previous steps, the Error 50 code continues to appear, your printer may have a more serious problem that requires professional intervention. Please contact Brother's official technical support and explain your situation. They will guide you on how to proceed, and if necessary, arrange for your printer to be sent for repairs.

In summary, error code 50 on Brother brand printers is a mechanical problem that can have several causes, from a paper jam to an electrical failure. To solve this problem, you can follow the steps that we have indicated in this article, of which and in a very summary way they would be the following:

• Restart the printer and computer to refresh memory
• Remove any jammed paper or foreign object that may be inside your printer
• Clean the print head and the cart where it slides
• Check the PCB electronic board and the printer power supply
• Repeat all the steps above and make sure to follow everything exactly if the problem persists
• Request a review of your printer with Brother technical support

That's all for today! Thank you very much for reading us this far. We are sure that you will be able to solve error code 50 on your Brother printer. In general, these types of problems usually appear due to lack of maintenance, so keeping your printer up to date is important to ensure its good and correct functioning. Until next time!