Daitsu Air-Conditioning Error E6

What could be the E6 error affecting your Daitsu air conditioner?

Daitsu is a highly recognized brand with over 20 years of experience in the commercial sector. Offering a wide range of aerothermal products, air conditioning, and air quality for residential, commercial, and industrial applications. Undoubtedly, one of the best brands in the market when it comes to air conditioners.

The E6 error code in Daitsu air conditioners indicates that there is a problem with communication between the indoor and outdoor units. If you've wondered why your home isn't cooling down, we're here to tell you not to worry. In this article, we'll guide you through the causes of this problem and also the solutions so you can enjoy the comfort of your home again.

First, we need to know the causes that have caused this problem so that we can proceed with the solutions more accurately:

• Reversed wiring in the installation: If the unit is new and recently installed, it is possible that the wiring has been connected in reverse.
• Deterioration of the wiring in your air conditioner: Over time, cables can suffer damage such as breaks, cuts, or burns, affecting the communication between the indoor and outdoor units.
• Corrosion of the connections: Moisture from the air conditioner itself and dust in the environment can cause the connections to corrode, preventing the flow of electric current.
• Failure in the electronic PCB board: A fault in the electronic board of one of the air conditioner units can affect communication.
• Electrical interference: Electrical noise, poor connection in the electrical network, or voltage surges and spikes can interfere with communication.

All of these causes can lead to the E6 error code appearing on your Daitsu air conditioner. But now, how about we look at the solutions we've prepared for you?

How are we going to fix the E6 error code of the Daitsu air conditioner?

If you want to fix the E6 error code on your Daitsu air conditioner, here are the steps you need to follow. Please take note of each one and do not overlook any:

1. Turn off and unplug the air conditioner from the power source to reset the sensors: This is the easiest and simplest step of all, which is to apply a reset to the air conditioner. To do this, simply turn off the air conditioner and unplug it from the power source for a few minutes. Once the time has passed, reconnect the unit and turn it on to check if the E6 error code has disappeared.
2. Check the electrical wiring connecting the indoor and outdoor units of your air conditioner: If the wiring is not in good condition, then this error will appear on your air conditioner. Visually inspect all this wiring and look for damage or defects if any. Make sure that no wires are broken, cut, burnt, disconnected, or charred. If you find wires in poor condition, you will need to replace them with new ones or make the necessary repairs.
3. Verify the wiring connections in the indoor and outdoor units of your air conditioner: These connections must be in very good working condition. Check and make sure that all connections are well tightened and free from dirt or dust that may affect contact. If you notice that these connections are corroded due to the moisture generated by the air conditioner itself, then you would need to apply electronic cleaner to the contacts and thoroughly clean with a brush to remove all accumulated sulfate.
4. Check that the wiring is not reversed or that there is a poor connection between the units: It often happens that wiring is mistakenly reversed during the installation of the air conditioner or during scheduled maintenance. So you need to check that the wiring is correctly installed according to the manufacturer's manual.
5. If the problem persists, repeat all the previous steps and make sure to follow everything as we have indicated: If what we have indicated to you previously does not work, then it may be a problem with the PCB electronic boards of one of the units. In that case, you would need to conduct a very thorough inspection and have extensive knowledge in electronics, as well as having the appropriate tools for this inspection. If you think this could be your case, then we recommend that you contact an authorized Daitsu service technician.
6. Call a Daitsu technical service and request a home visit for a more thorough inspection: A qualified Daitsu technician can diagnose the problem accurately and solve it efficiently. We invite you to call Daitsu technical support to have your air conditioner checked and receive an appropriate solution with all possible guarantees.

In conclusion, we know that the E6 error code in Daitsu air conditioners is undoubtedly a communication failure between the indoor and outdoor units of the appliance. A problem that has likely been caused by a poor connection in the wiring or by wear and tear on the connections. You can try to fix this issue yourself without any problem, as long as you follow the steps we have described above. If you are not successful or feel it is more challenging than expected, you can contact an authorized Daitsu technical service for assistance.

Tips to prevent the E6 error code from recurring in your Daitsu air conditioner

• Always perform regular maintenance of your air conditioner with a professional and qualified technician.
• Protect the equipment from electrical overloads by using a voltage regulator or a surge protector.
• During stormy weather, avoid using the air conditioner to prevent electrical surges.
• Ensure that the installation of the air conditioner is carried out by a qualified professional.

And that's it! Thank you very much for reading this far. We hope this article has been very useful to you and that you can resolve the E6 error code soon affecting your Daitsu air conditioner and that you do not encounter too many problems when making these repairs. Good luck and see you next time!