Miele Dishwasher Error f11

What does this error code mean in Miele dishwashers?

As we know, the Miele brand is one of the oldest in the market when it comes to home appliances. However, a little flaw may occur in your dishwasher if you haven't performed the proper maintenance or if the installation hasn't been done correctly following the manufacturer's precise instructions.

This is a flaw that you should address immediately if you want to continue using your dishwasher normally. The f11 error code in Miele dishwashers is an indicator of issues related to water drainage. When this code appears, it's important to address the problem efficiently to avoid further damage to your appliance.

Next, we're going to list some causes that can lead to this failure in your dishwasher:

• A clogged drainage system: The dishwasher cannot evacuate water properly due to an obstruction in the pipes or the drainage filter. This could be due to food residues, solid waste like bones, foreign objects, or grease buildup that interrupts the water outlet.
• A defective drainage pump: If the drainage pump is damaged or not functioning properly, the water will not be expelled adequately, leading to this failure appearing on your dishwasher's screen.
• Issues with the drainage hose: A drainage hose in poor condition will not be able to properly perform its job of evacuating water through your dishwasher's system. Check that the drainage hose is not bent, crushed, or blocked.

As you may have noticed, all the causes point to failures in your dishwasher's drainage system, so efforts to correct this failure should be directed towards that part.

Could we find a definitive solution to the f11 error failure in Miele dishwashers?

Here we are going to provide you with a list of solutions that we have prepared for you. We have listed these solutions from the easiest and simplest to the most complicated, so it's advisable to read them all and pay attention to each one:

1. Turn off and disconnect the dishwasher from the power supply to rule out possible temporary errors: Before you can take any other action, it's best to start with this simple step. Turn off the dishwasher completely and disconnect it from the electrical outlet. This may help rule out temporary errors or false positives, as this procedure completely resets the system, including the dishwasher's sensors. Once at least 15 minutes have passed, reconnect the dishwasher and proceed to turn it on again to check if the error has disappeared. If the problem persists, then you will have to proceed with the following steps that we indicate below.
2. Clean the drainage filter of your Miele dishwasher and make sure it is not clogged: Locate the filter of your dishwasher and remove it so you can carefully clean it with a soft-bristle brush, warm water, and some vinegar to disinfect it. Remove any food residue or dirt that may be obstructing the water flow through this filter. If you notice that the filter is very damaged or has breaks, consider replacing it with a new one that is compatible with your dishwasher.
3. Check the drainage hose of your Miele dishwasher and ensure it is in good condition: Inspect the drainage hose of this dishwasher and verify that it is not very bent, crushed, broken, or blocked. Disconnect this hose and inspect it thoroughly. If you notice that it has a very pronounced bend, proceed to straighten it so that it does not get clogged by the same curve of the hose. The hose may also be crushed by the dishwasher itself or by the wall where you have the appliance located, so check that this is not the case. If you notice that the hose is blocked, you can try to unclog it by inserting a thin wire through one end to try to dislodge it. Perform this procedure carefully, so as not to puncture the hose as that will bring you more problems in the future. You can replace the hose if you find it in very poor condition.
4. Ensure that the drainage pump of your dishwasher is in good operational condition: Access the drainage pump (usually located at the bottom of the dishwasher) and check for any objects stuck in it. Also, check if the pump is functioning correctly, otherwise, you will have to replace it with a new one that is compatible with your Miele dishwasher. If you have seen the filter of your dishwasher in very poor condition, then surely the drainage pump has been seriously affected, so you have to check it well. Make sure the pump is working properly, if the problem persists, then continue with the last 2 steps we have for you.
5. Carefully review all the previous steps and repeat them if necessary: You may have left a hose improperly connected, sediments or debris in the pump or filter, or in the hoses, and the problem has not been able to be solved due to those details you have overlooked. Go over everything again and make sure you have followed all the steps we have indicated above and with all the necessary details. If the problem persists, then it's time to leave the problem in the hands of Miele dishwasher experts.
6. Contact Miele's technical support for a thorough and exhaustive review of your dishwasher: If none of the above solutions solves the problem with your dishwasher, contact Miele's technical service, which are experts in their own appliance. Explain in detail the problem with your dishwasher and they will surely make a home visit and solve the problem in record time. Your dishwasher has a solution, so don't let this failure worsen more than you expected, making the repair cost more expensive and complicated to solve.

To conclude, we have that the f11 error code in Miele dishwashers is generally related to problems with the drainage of the appliance. This failure needs to be solved as soon as possible because if you don't, dirty water could overflow inside your dishwasher, causing damage to other components. To solve this problem, check and clean the drainage filter, inspect the hoses, and also the pump. If the problem persists, you know you can call Miele's technical support for professional assistance.

That would be all for today, friend! If you follow all the steps we have mentioned in this article, we are sure that your dishwasher will be working correctly in no time. Thank you very much for reading this far. Best regards!