Select your language

Siemens Dishwasher Error e22

siemens dishwasher error e22

What does this fault mean for the Siemens dishwasher?

Caution, but not too much! This error code is a malfunction that your dishwasher has encountered, but it can be very easy to fix. Today, we'll explain it in detail so you can find a quick and effective solution to continue using your precious dishwasher.

The error code e22 indicates a problem with the dishwasher's filtering system. This means that the filters are blocked or damaged, preventing water from circulating correctly through the appliance. If this issue isn't resolved promptly, it could cause the dishwasher to malfunction, potentially leading to leaks and damage to other components.

What could have caused this fault to occur in your Siemens dishwasher are the following possible reasons:

  • The filters are dirty or clogged: Whether it's food residues, grease, solids like bones left on dishes, pulp from juices in glasses, etc., these can prevent water from flowing properly and cleaning your dishes thoroughly.
  • The filters are broken or deformed: The heat from the dishwasher over time can cause filters to deform, or they may simply be broken due to excessive use and poor maintenance.
  • The filters are not properly positioned or adjusted: Perhaps there was recent maintenance on the dishwasher, and the filter wasn't correctly installed. You need to check that the filter is well-adjusted and properly placed to function correctly.

These are the causes of this fault in your Siemens dishwasher. As you've noticed, they all relate to the appliance's filter, so our efforts to find a solution to the problem will focus on this component.

How could the fault of error e22 in the Siemens dishwasher be resolved?

The good news is that this problem can have a quick and prompt solution, as it is a very easy malfunction to fix. But to get there, you first need to follow the steps we'll outline below:

  1. Restart the dishwasher to reset the sensors and clear the internal memory: Disconnect the dishwasher's power cable from the outlet for a few minutes to force the sensors to reset and the internal memory to clear. Wait for about 15 minutes with the dishwasher disconnected, and once the time has passed, reconnect the power cable to the outlet, ensuring a firm and secure connection. Turn on the Siemens dishwasher and select a washing program to check if the fault has disappeared.
  2. Maintain the filter of your Siemens dishwasher and check its condition: Remove the dishwasher filter and use a soft-bristled brush to remove any dirt you find. Handle this procedure carefully; avoid using excessive force with the brush to prevent damaging the filter mesh, which would require replacement. Ensure you remove any debris stuck in the filter, such as bones, fruit pulp, grains, and food remnants. We recommend using warm water for cleaning and a little vinegar to disinfect and eliminate odors. Rinse the filter thoroughly after cleaning and dry it before reinstalling. When reinstalling, ensure it is properly installed; refer to the user manual provided by the manufacturer for proper installation. If you notice the filter is broken or deformed, you'll need to replace it with a new one of the same model as the damaged one.
  3. Repeat all the above steps if the problem persists until you find a solution: Ensure you've followed all the steps exactly if the fault continues in your dishwasher. We recommend conducting a second check of all the steps we've outlined above. If after cleaning, inspecting, and correctly installing the filters you still see the fault in your dishwasher, it may be time to leave the problem in the hands of experts, as this indicates the fault may be more complicated to resolve than initially thought.
  4. Seek Siemens technical support to resolve the problem: If you feel you cannot fix this fault on your own, contact Siemens' official technical service and request a home visit. Siemens has the original spare parts your dishwasher needs, along with the knowledge and tools required to ensure your precious appliance is restored like new. We are confident you can resolve this fault, so go ahead and make the best decision.

In conclusion, we can summarize that the fault with error code e22 in a Siemens dishwasher is due to a problem with the appliance's filter, plain and simple. Therefore, your review efforts should focus on the dishwasher's filter to find the most suitable solution in this case. This is undoubtedly a straightforward malfunction to fix, so don't be discouraged. Good luck and until next time!

¿Te ha servido este artículo? Por favor déjanos tu Voto