Balay Dryer Error 701

What is the fault of the Balay error affecting your dryer 701?

Do you have a Balay sc701 dryer and don't know how to solve its most common problems? Don't worry, in this article I'm going to tell you everything you need to know so your dryer works as it did on the first day. Keep reading and discover the most common errors that this appliance can present and find out how to fix it easily and quickly.

The Balay sc701 dryer is a very practical and efficient model that allows you to dry your clothes in a short time and with a low energy consumption. However, like any electronic device, it can suffer some failures that affect its performance or even prevent it from working correctly.

Sometimes, the sc 701 dryer may give a full tank error and also your Balay dryer may have a dirty filter error. From the simplest problem to solve to the most complicated to resolve, we show you below, some of the most common problems you may face with your Balay 701 dryer:

• The dryer does not turn on or does not respond to buttons: it may be that the power cord is disconnected, damaged, or there is a problem with the plug or the switch. It could also be that the door is not properly closed or the safety lock is activated.
• The dryer does not heat or dry clothes: it could be that the lint filter is blocked, that the water tank is full or that the moisture sensor is dirty or defective. It could also be that the selected temperature is too low or that the clothing load is excessive or inappropriate.
• The dryer makes a lot of noise or vibrates too much: it may be that the clothes are badly distributed inside the drum, that there is a foreign object inside or that the dryer's legs are not level. It could also be that the fan, motor, or bearing are worn or broken.
• The dryer shows an error code on the screen: there may be a problem with the electrical system, the thermostat, the temperature sensor, the resistor, or the electronic board. Each error code has a different meaning and requires a specific solution.

How to solve the most common errors of the Balay sc701 dryer?

If you have encountered any of these problems with your Balay sc701 dryer, you don't have to despair. There are some simple solutions you can try before calling the technical service. Here are some possible solutions for each case:

1. Restart the dryer: Sometimes, a simple restart can solve many problems. To do this, unplug the dryer for a few minutes and then plug it back in. Check if the problem has been solved or if it persists.
2. Clean the lint filter: It's important to clean the filter regularly to prevent lint from accumulating and obstructing the airflow. To do this, remove the filter from its housing and remove the lint with your hands or a soft brush. Then, put the filter back in place.
3. Empty the water tank: If the tank is full, the dryer will not be able to evaporate the moisture from the clothes and will not dry properly. To empty it, remove the tank from its housing and pour the water into a container or sink. Then, put the tank back in place.
4. Clean the moisture sensor: The sensor detects the level of moisture in the clothes and adjusts the drying time and temperature. If it is dirty or defective, it can cause insufficient or excessive drying. To clean it, locate the sensor at the back of the drum and rub it with a damp cloth and a bit of vinegar or isopropyl alcohol. Then, dry it with another dry cloth.
5. Adjust the temperature and the load: It's important to select the appropriate temperature for each type of fabric and not overload the dryer with more clothes than it can handle. Check the labels on the clothes and follow the manufacturer's instructions to choose the most appropriate program. Distribute the clothes evenly inside the drum and avoid mixing garments of different sizes and thicknesses.
6. Level the dryer legs: If the dryer is not properly leveled, it can cause noises and annoying vibrations. To level it, make sure the floor where it is placed is firm and flat. Then, adjust the legs by turning them to the right or left until the dryer is stable and does not sway.
7. Check the cable, the plug, and the switch: If the dryer does not turn on or does not respond to buttons, there may be a problem with the power supply. To check it, make sure the cable is not disconnected, damaged, or cut. Also, check that the plug and the switch are in good condition and that there is no blown or tripped fuse.
8. Close the door properly and deactivate the safety lock: If the door is not properly closed or if the safety lock is activated, the dryer will not operate. To solve this, make sure the door fits well and makes a click when closing. Also, make sure the safety lock is deactivated by pressing the corresponding button for a few seconds.
9. Repeat all the above steps if the problem persists: If after trying all the previous solutions the problem is still not solved, there may be some internal component that is damaged or faulty. In this case, it is best to repeat all the previous steps to rule out any possible external or accidental cause.
10. Go to Balay's technical support to solve the problem: If none of the previous steps have worked, it is advisable to contact the official Balay technical service so that a qualified professional can check your dryer and offer you an appropriate solution. You can call the customer service phone number or request an appointment online through their website.

I hope this article has been useful and that you have been able to resolve the problems you had with your sc701 dryer. Remember, it is important to keep your dryer maintained regularly to ensure its optimum operation and extend its lifespan. This way, you will avoid possible breakdowns and save time and money. If you have any questions or queries, do not hesitate to consult with Balay's technical support to help you solve your problem quickly and effectively.