Balay Drying machine Error e90

What is the e90 Balay error fault affecting your dryer?

Hello! Has it ever happened to you that your Balay dryer shows an E90 error code and you don't know what to do? Well, don't worry, because in this article we are going to explain everything you need to know about this type of error and how you could fix it easily and quickly.

We'll start by telling you that this type of problem can be a bit complex to solve, unless you have knowledge of electronics and understand how a PCB circuit board works. The E90 error code is a fault that indicates that there is a communication problem between the electronic board and the dryer's control panel. This can be due to several causes, such as:

• A loose or damaged cable that prevents the transmission of data between the components.
• A defective electronic board that does not send or correctly receive the signals from the control panel.
• A damaged control panel that does not display or correctly interpret the data from the electronic board.
• An electrical or magnetic interference that alters the functioning of the circuits.

How to fix the e90 error on Balay dryer?

Fortunately, there is a solution for your dryer if it shows this annoying and complex error code. Don't throw your dryer in the trash because to solve the E90 error code, you can follow these steps:

1. Restart the dryer: Sometimes, a simple restart can solve the problem. To do this, unplug the dryer from the electrical outlet for a few minutes and then plug it back in. Check if the E90 error code has disappeared.
2. Check the cables: If the restart doesn't work, there might be a loose or damaged cable preventing communication between the board and the panel. To do this, unplug the dryer from the power outlet and open the back panel with a screwdriver. Look for the cables that connect the electronic board with the control panel and check if they are well secured and in good condition. If you see any broken or burnt cables, replace them with a new one.
3. Replace the electronic board: If the cables are okay, the problem might be the electronic board. For this, unplug the dryer and open the back panel with a screwdriver. Locate the electronic board and remove it carefully. Check if it has any signs of damage or burn. If so, replace it with a new one of the same model and brand.
4. Change the control panel: If the electronic board is fine, the problem might be the control panel. For this, you will have to unplug the dryer and open the front panel with a screwdriver. Locate the control panel and remove it carefully. Check if it has any signs of damage or burn, use a multimeter to detect any type of error or problem. If so, replace it with a new one of the same model and brand.
5. Go to Balay's technical support to solve the problem: If none of the above works, it might be a more complex failure that requires a professional's intervention. In that case, it is best to contact the official Balay technical service and request a home visit for them to check your dryer and give you a quick and effective solution.

In summary, to solve the E90 error code on your Balay dryer you have to:

• Restart the dryer.
• Check the cables.
• Replace the electronic board.
• Change the control panel.
• Go to Balay's technical support to solve the problem.

I hope this article has been useful to you and that you have been able to solve the E90 error code on your Balay dryer. Remember that maintaining your dryer with good maintenance and up to date can avoid these types of complicated situations and at the same time ensures a long useful life and optimal operation. See you next time!