Select your language

Balay Dryer Error f17

error f17 dryer balay

What is the f17 error on your Balay dryer?

Has the error code F17 appeared on your Balay dryer and you don't know what it means or how to solve it? You've come to the right place, where we'll explain everything you need to know about this type of error and how you can easily fix it.

The error code F17 indicates that there is a problem with the water supply of the dryer, so you have nothing to worry about, as it is not a serious problem. This could be due to various causes, such as:

  • The water tap is closed or has low pressure.
  • The water inlet filter is clogged or dirty.
  • The water inlet hose is kinked or damaged.
  • The water inlet valve is defective or blocked.
  • The electronic board of the dryer is damaged.

How to fix the f17 error on your Balay dryer?

This type of error has an easy and simple solution, so you don't have to throw your dryer away. However, we provide a series of steps to follow so you can fix the F17 error code on your Balay dryer on your own:

  1. Restart the dryer: Turn off the appliance, disconnect it from the power supply and wait a few minutes. Then reconnect it and turn it on. Sometimes, this can be enough for the error to disappear.
  2. Check the water tap: Make sure it is open and has enough pressure. If necessary, open the tap more or try a different one.
  3. Clean the water inlet filter: Remove the water inlet hose from the back of the dryer and remove the filter at the end. Clean it with a soft brush and hot water. Replace it and connect the hose.
  4. Check the water inlet hose: Check that it is not kinked, crushed, or damaged. If so, replace it with a new one or straighten it carefully.
  5. Verify the water inlet valve: Locate the valve on the back of the dryer and check that it is not blocked or damaged. If so, replace it with a new one or have it repaired.
  6. Check the dryer's electronic board: If you have checked everything above and the error still appears, the problem may be in the electronic board. In that case, you will have to contact Balay's technical service to repair or replace it.
  7. Repeat all the above steps if the problem persists: If after performing all checks and solutions the F17 error code still appears, there may be some other fault in the dryer that you have not detected. Therefore, we recommend that you repeat all the steps from the beginning and check if the error is solved.
  8. Go to Balay's technical support to solve the problem: If none of the above works, it is most likely that your dryer has some serious problem that requires professional intervention. In that case, do not try to fix it yourself, as you could worsen the situation or lose the warranty. It is best to contact Balay's technical support and explain your case. They will give you the necessary instructions to solve the problem.

In summary, to resolve the F17 error code on your Balay dryer you have to:

  • Restart the dryer
  • Check the water tap
  • Clean the water inlet filter
  • Check the water inlet hose
  • Verify the water inlet valve
  • Check the dryer's electronic board
  • Repeat all the above steps if the problem persists
  • Go to Balay's technical support to solve the problem

We hope this article has been useful and that you have been able to solve the F17 error code on your Balay dryer. Remember that if you have any questions or inquiries you can leave us a comment or contact us by email. Thank you for reading us!

¿Te ha servido este artículo? Por favor déjanos tu Voto