Balay Washer Error e13

What is the e13 Balay error affecting your washer?

Has the E13 error code appeared on your Balay washing machine and you don't know what it means or how to fix it? Don't worry, in this article we will explain everything you need to know about this type of error and how you can easily fix it.

The E13 error code indicates that there is a problem with the draining of water from the washing machine. This can be due to several reasons, for example:

• A blockage or obstruction in the filter, pump, or drain hose.
• A failure or a malfunction in the pump or in the water level sensor.
• An overload or an imbalance in the load of clothes.
• Insufficient water pressure or a defective water inlet.

How to fix the e13 error on a Balay washing machine?

To fix the E13 error code on your Balay washing machine, you can follow these steps that we present below:

1. Restart the washing machine: Turn off and unplug the washing machine for a few minutes, then reconnect and turn it back on. Sometimes, this may be enough to reset the system and clear the error.
2. Check the filter, pump, and drain hose: Open the filter cover and clean out any foreign objects or dirt that may be blocking the water flow. Also, check that the pump and drain hose are not clogged, bent, or damaged.
3. Check the water level sensor: The water level sensor detects how much water is in the drum and sends a signal to the electronic board to activate or deactivate the pump. If the sensor is faulty, it can send an incorrect signal and trigger the E13 error. To check it, you can use a multimeter and measure the resistance of the sensor. If it is too high or too low, it means it is faulty and needs to be replaced.
4. Check the laundry load: Make sure you haven't overloaded the washing machine with too much or very heavy and bulky laundry. This can cause imbalance in the drum and make it difficult for the water to drain. Also, ensure that you distribute the laundry evenly in the drum and use the appropriate program for each type of fabric.
5. Check water pressure and inlet: Verify that the water tap is open and that there is sufficient water pressure to fill and drain the washing machine properly. Also, check that the water inlet hose is not bent, blocked, or damaged.
6. Repeat all the previous steps if the problem persists: If after performing all the checks and cleanings mentioned above, the E13 error code continues to appear, you can try repeating the steps once again to ensure that you haven't missed anything.
7. Contact Balay technical support: If none of the above works, there may be a more serious malfunction in some internal component of the washing machine, such as the electronic board, motor, or wiring. In that case, it is best to contact Balay's official technical service and request professional repair.

In summary, to resolve the E13 error code on a Balay washing machine, you should do the following:

• Restart the washing machine.
• Clean the filter, pump, and drain hose.
• Check the water level sensor.
• Check the laundry load.
• Check the water pressure and inlet.
• Repeat the previous steps if necessary.
• Contact Balay technical support if nothing works.

Your precious washing appliance is very important for your home! Don't neglect its maintenance; we assure you that if you treat your Balay washing machine with care, it will provide you with many happy and productive washing moments.