Select your language

Balay Washer Error e16

error e16 washer balay

What is the e16 error fault in your Balay washing machine?

Have you ever experienced going to start a wash and finding that the display shows a mysterious E16 error code? Do you know what it means and how to fix it? If not, don't worry, because in this article we're going to explain everything you need to know about this common problem in Balay brand washing machines.

The E16 error code indicates that there's a problem with the closure of the washing machine's door. This can be due to several causes, such as:

  • The door is poorly closed or blocked by some object.
  • The door seal may already be worn out or is in bad condition.
  • You are using too much soap, and the foam is causing a problem.
  • The latch or magnet of the door are dirty or damaged.
  • The wiring or the electronic board of the washing machine are defective.

How to fix the e16 error in Balay washing machine?

Next, we will show you a series of steps that you can apply to solve the E16 error code. Follow these steps and fix your appliance right away:

  1. Restart the washing machine: Turn off the washing machine, unplug it from the power source and wait a few minutes. Then reconnect it and turn it on. Sometimes, this is enough for the error to disappear.
  2. Check the door: Make sure that the door is properly closed and that there is nothing obstructing its closure. Sometimes clothes can get stuck and hinder its closure. If you see that the latch or the magnet are dirty, clean them with a damp cloth. If you see that they are broken, you will have to replace them.
  3. Check the door seal: If this seal is cracked, broken or worn out, it could trigger the E16 error code. Make sure that this seal is in perfect condition or otherwise you will have to replace it.
  4. Use less soap: You might be using too much soap, which creates an excess of foam that can negatively affect your washing machine's sensors.
  5. Check the wiring and the electronic PCB board: If the previous steps do not work, the problem could be in the wiring or the electronic board of the washing machine. To check this, you will have to open the washing machine and check the wires and connections. If you see any loose or burned wire, you will have to repair or replace it. If you see that the electronic PCB board is damaged, you will have to replace it.
  6. Repeat all the previous steps if the problem persists: If after doing all of the above, the E16 error code still appears, there might be some other failure in the washing machine that you have not detected. In that case, we recommend that you repeat all the previous steps with more care and attention.
  7. Go to the Balay technical support to solve the problem: If none of the above works, it is most likely that your washing machine has a serious problem that requires the intervention of a professional. Therefore, we advise you to contact the Balay technical service and explain your situation to them. They will be able to help you solve the problem in the most effective, quick and safe way possible.

In summary, to solve the E16 error code on a Balay washing machine, you have to:

  • Restart the washing machine.
  • Check the door.
  • Inspect the wiring and electronic board.
  • Repeat all the above steps if the problem persists.
  • Contact Balay technical support.

We hope this article has been useful to you and that you have been able to resolve the E16 error code on your Balay washing machine. Happy washing!

¿Te ha servido este artículo? Por favor déjanos tu Voto