Select your language

Balay Washer Error e2

error e2 washer balay

What is the e2 Balay error that is affecting your washing machine?

Has it happened to you that your Balay washing machine shows you an error code E2 or E02 and you don't know what it means or how to solve it? Well, don't worry, because in this article I'm going to explain everything you need to know about this annoying problem that can ruin your laundry day.

The error code E2 or E02 indicates that there is a problem with the washing machine's motor. This can be due to several causes, such as:

  • A failure in the wiring or in the electrical connection of the motor: This usually happens when your cat entertains itself by biting the cables or when there is a power outage in your neighborhood.
  • A blockage or obstruction in the drum or in the motor fan: This can occur when you put too much clothes in the washing machine or when a sock falls into the motor.
  • Wear or a fault in the brushes or in the motor collector: If your appliance has not been properly maintained, then the E2 error may appear on your washing machine's display.
  • An overheating or a motor overload: This can happen when you put the washing machine at maximum power and temperature or when you try to wash a carpet or a duvet.

How to solve the e2 error of Balay washing machine?

Any of these causes can prevent the motor from spinning correctly and the washing machine from completing its washing cycle. Therefore, it's important that you know how to solve this error and prevent it from repeating. Here are some possible solutions:

  1. Restart your washing machine: Sometimes, a simple restart can solve the problem. To do this, unplug the washing machine from the power supply for a few minutes and then plug it back in. Wait for the control panel to light up and check if the error has disappeared. If not, don't despair, there are more options.
  2. Check the wiring and the electrical connection of the motor: If the restart doesn't work, there may be a problem with the wiring or the electrical connection of the motor. To check it, you'll have to remove the back of the washing machine and locate the motor. Then, verify that the wires are well connected and that there are no signs of damage or burns. If you find any loose or broken wire, you will need to replace or repair it.
  3. Clean the drum and the motor fan: Another possible cause of the E2 or E02 error is that something is blocking or obstructing the drum or the motor fan. This can prevent the motor from spinning freely and cause excess heat. To solve it, you'll have to empty the washing machine and remove any foreign object that may have gotten trapped in the drum or the fan. You can also clean them with a damp cloth to remove any dust or dirt they may have.
  4. Change the brushes or the motor collector: If none of the previous solutions work, the problem may be in the brushes or in the motor collector. These are the parts that make contact between the motor and the electrical current and can wear out or break over time. To check this, you'll have to dismantle the motor and remove the brushes and collector. Check if they have any signs of wear or damage and replace them with new ones if necessary. If you don't have the parts on hand, you can buy them in a specialized store or online.
  5. Repeat all the previous steps if the problem persists: If you have followed all the previous solutions and the E2 or E02 error still appears, there may be some other fault in the motor or in the electronic board of the washing machine. In that case, I recommend that you repeat all the previous steps carefully and attentively to make sure you haven't missed anything. If you are very persistent, you may manage to fix your washing machine on your own.
  6. Contact Balay technical support to solve the problem: If after repeating all the previous steps the error is still not solved, it is best to contact the official Balay technical service so that they can check your washing machine and give you a definitive solution. They have the knowledge and the necessary tools to repair your appliance and ensure its proper operation.

¿Te ha servido este artículo? Por favor déjanos tu Voto

Menu