Select your language

Beko Dishwasher Error e01

error e01 dishwasher beko

What is the fault of the E01 Beko error affecting your dishwasher?

Hello there! If you're here, it's likely because you've encountered the E01 error code on your Beko dishwasher and you're unsure about its meaning or how to fix it. Don't worry, in this article we'll explain everything you need to know to understand this malfunction affecting your dishwasher, as well as the causes behind it and the solutions to resolve the issue.

The E01 or E1 error code on Beko brand dishwashers indicates that there's a problem with the water pressure or with the drain and/or drainage pump of the dishwasher. This can result in the dishwasher not operating correctly, not cleaning the dishes properly, or water leakages occurring. Generally, this type of problem arises from a damaged pump or an insufficient water supply.

The possible causes that can lead to the E01 error code on Beko dishwashers are:

  • The water pressure is too low
  • An obstruction in the water supply
  • A water leak somewhere in the system
  • A filter that's too dirty and lacking maintenance
  • A damaged or blocked drain and/or drainage pump

How to fix the E01 error of the Beko dishwasher?

Fortunately, this kind of problem has an easy and prompt solution for you. The possible solutions you can implement to fix this issue are:

  1. Restart the dishwasher: Sometimes, a simple restart can fix the entire problem with your dishwasher. To do this, completely turn off your dishwasher and unplug it from the electrical outlet for a few minutes. Plug it back in and turn everything on again. This acts to reset the sensors and recalibrate them, which might solve the issue.
  2. Check the water pressure: Turn on the water supply tap and see if it flows out with sufficient force and fluidity. If not, check the inlet hose and ensure it's not bent, crushed, or blocked. If there's any water leakage, you'll need to fix it. Also, check the seals that connect all the hoses.
  3. Clean the dishwasher filter: This device prevents solids from accumulating in the dishwasher and possibly causing internal damage. You need to carefully remove it and clean it with warm water and vinegar. If the filter is broken, it indicates that food waste might have reached the pump and potentially burned it out. You'll need to completely replace the filter in that case and inspect the pump.
  4. Clean the drain/drainage pump: Remove the dishwasher's drain/drainage pump and clean it from the inside. Check if it has any waste, and if it does, remove all of it. Clean it using warm water and a bit of vinegar. If the pump's motor is in very bad condition and damaged, then you'll need to replace the pump with a new one.
  5. Repeat everything again, follow the steps to the letter: If after trying the previous solutions the error still shows up, repeat the steps from the beginning and ensure everything is in order. Check everything we've explained earlier for a second time.
  6. Seek Beko's technical support to solve the problem: If none of the previous solutions work, it's possible that the problem is more serious and requires a professional's intervention. Contact Beko's technical service and request a visit to your home. They'll most likely find an appropriate solution and will address the issue swiftly and effectively.

In conclusion, the E01 error code on a Beko dishwasher indicates that there might be a fault in the drainage pump or an insufficient water supply in the system. To fix this issue, you would have to do the following:

  • Restart the dishwasher
  • Check the water pressure entering the dishwasher
  • Clean the dishwasher filter
  • Clean the dishwasher's drain/drainage pump
  • Repeat all the previous steps if the problem persists
  • Seek Beko's technical support to solve the problem

¿Te ha servido este artículo? Por favor déjanos tu Voto