Error E17 Dishwasher Bosch

What is the fault of error E17 Bosch affecting your dishwasher?

Oh no! Another problem that may be related to water entering the dishwasher. As we well know, this vital liquid is extremely important for the proper functioning of our appliance. Without water, the device simply won't be able to wash anything at all.

But what exactly could be happening with your dishwasher? That's what we're going to find out today. The error code E17 on Bosch dishwashers indicates that the water supply time has been exceeded, meaning there is an issue with water entering the dishwasher.

This fault can have various causes, and we list them below:

• That the water tap is closed or has low pressure
• That the water inlet filter is dirty or obstructed
• That the water inlet hose is bent, crushed, or broken
• That the water level sensor is damaged or dirty
• That the water inlet valve is damaged or blocked

Fortunately, none of these causes are as serious as they may seem, and they may have a very easy solution. So let's see how we could fix the E17 error code on your Bosch dishwasher.

How to fix error E17 on Bosch dishwasher?

You don't have to wait any longer, the time has come to find a solution to this fault that your dishwasher has. To solve the E17 error code on your Bosch dishwasher, you can follow these steps below:

1. Restart the dishwasher to reset the sensors: Let's start with the simplest step. Turn off your dishwasher and disconnect it from the power outlet for a few minutes, then reconnect it. This gives the sensors a "break" to return to their normal default state. Turn on your dishwasher and start a short washing cycle, check if the E17 error code has disappeared.
2. Check that the water tap is open and has sufficient pressure: If the water flow is not smooth enough, the dishwasher will fill up with water very slowly, and the waiting time for water loading will exceed what is necessary. Make sure the tap is fully open and that water is indeed flowing normally to your dishwasher.
3. Clean the water inlet filter of your dishwasher: If this filter is very dirty, water won't be able to enter your dishwasher freely, and maintenance is required. Disconnect the dishwasher from the power outlet and close the water tap. Then, unscrew the water inlet hose and carefully remove the filter. Clean it with a soft brush and warm water. Replace the filter and hose, and open the water tap again.
4. Check that the water inlet hose is not bent, crushed, or broken: This hose needs to be in good condition. Check that it is not crushed by the dishwasher or the wall. Also, ensure it is not excessively bent and does not have any leaks or breaks. If so, adjust it or replace it with a new one if necessary. Take the opportunity to check the joints connecting the hose to the shut-off valve and at the other end where it is connected to the dishwasher.
5. Ensure that the water level sensor is functioning correctly: Open the dishwasher door and locate the sensor, usually at the bottom right. Wipe it with a damp cloth and make sure there are no dirt or soap residues that may interfere with its operation.
6. Verify that the water inlet valve is not damaged or blocked: Remove the lower cover of the dishwasher and locate the valve, usually at the back left. Check for any foreign objects preventing its opening or closing. If necessary, replace the valve with a new one.
7. Repeat all the above steps if the problem persists: Ensure you have followed all the steps exactly and leave nothing to chance. If the problem persists, then perform a second check of everything mentioned above.
8. Seek assistance from Bosch technical support if none of the above steps work: If you haven't been able to fix this problem on your own, it may be time to seek technical support for assistance. And who better than Bosch themselves? Give them a call and schedule a home visit; we're confident you'll be in good hands. They will provide an accurate diagnosis of what might be happening with your dishwasher and offer a prompt and effective solution with all legal guarantees.

In summary, the E17 error code means that we have a problem with the water inlet to the Bosch dishwasher. The possible causes of this problem are: closed or low-pressure water tap, dirty or obstructed filter, bent, crushed, or broken hose, defective or dirty sensor, damaged or blocked valve.

We have detailed the solutions you can apply to fix this problem, but we'll leave them here in a very summarized form:

• Restart the dishwasher to reset the sensors
• Check that the water tap is open and has sufficient pressure
• Clean the water inlet filter of your dishwasher
• Check that the water inlet hose is not bent, crushed, or broken
• Ensure that the water level sensor is functioning correctly
• Verify that the water inlet valve is not damaged or blocked
• Repeat all the above steps if the problem persists
• Seek assistance from Bosch technical support to solve the problem if none of the above steps works

We hope this article has been helpful, and you have been able to fix the E17 error code on your Bosch dishwasher. We recommend performing regular preventive maintenance on your dishwasher to avoid such situations and to use your appliance with peace of mind. Good luck and happy washing!