Error E24 Dishwasher Bosch

What is the fault of the E24 Bosch error affecting your dishwasher?

If you have a Bosch dishwasher and the E24 error code appears on the screen, it means there is an issue with the water drainage. It seems that Bosch dishwashers have several error codes related to water drainage and the pump, but thanks to them, we can have certainty, or at least an idea, of where to begin addressing this problem.

This E24 error code can be caused by various factors, such as a blockage in the drainage pump, a dirty filter, a bent hose, or an obstruction in the drainage system. These issues prevent water from exiting the dishwasher correctly and can lead to damage to the appliance or even your kitchen.

In this article, we will explain the possible causes of the E24 error code and how to resolve them easily and quickly. This way, you can enjoy your Bosch dishwasher without issues and with the best cleaning quality.

The E24 error code can have several causes, which we will outline below:

• A blockage in the drainage pump: The drainage pump is responsible for expelling dirty water from the dishwasher to the drain. If there is any object obstructing it, such as food remnants, paper, plastic, or glass, the water won't be able to exit, accumulating inside the dishwasher.
• Your dishwasher's filter is very dirty: The filter is a component located at the bottom of the dishwasher, designed to trap larger impurities and particles in the water. If the filter is dirty or filled with debris, it will hinder the correct flow of water to the drainage pump and then to the dishwasher's drain.
• A bent or damaged hose: The hose is the tube that connects the dishwasher to its drainage system. If the hose is bent, twisted, or crushed, it will make it difficult or impossible for water to exit the dishwasher.
• An obstruction or a clogged drain: The drain is where the dirty water from the dishwasher ends up. If there is anything blocking it, such as grease, hair, soap, or organic residues, the water won't be able to exit and will backflow into the dishwasher.

How to fix the E24 error on the Bosch dishwasher?

The good news is that this problem has a solution and here we are going to explain how you will be able to solve it. The E24 error code on your Bosch dishwasher can be solved by following these steps:

1. Restart the dishwasher to reset the sensors: The first thing you should do is turn off and disconnect the dishwasher for a few minutes. This will reset the sensors and clear any temporary errors the dishwasher may have. Then reconnect and turn it back on. If the problem was just a temporary glitch, the E24 error code should disappear.
2. Clean the dishwasher's drainage pump: To clean the drainage pump, open the dishwasher door and locate the pump, which is usually at the back or side of the appliance. Unscrew the cover carefully and remove any objects that may be obstructing the pump. Also, clean the cover and reposition it correctly.
3. Clean your dishwasher's filter with a soft-bristle brush and warm water: To clean the filter, locate it, usually in the central part at the bottom of your dishwasher. Turn the filter to the left to remove it and wash it under the tap with hot water, soap, and a little vinegar. Remove any food or dirt residue that may be inside or on the protective mesh, making sure to clean it with a soft-bristle brush to avoid damage. Place the filter back in its place and turn it to the right to secure it.
4. Inspect your dishwasher's hoses: To inspect the hose, disconnect the dishwasher and carefully move it to access the back. Then locate the hose, usually at the bottom of the appliance. Check that it is not bent, twisted, or crushed and that there are no leaks or cracks. If necessary, straighten the hose or replace it with a new one.
5. Unclog the dishwasher's drain: To unclog the drain, disconnect your dishwasher and remove the drain hose. You can use a metal rod or wire to remove any elements that may be blocking this hose; a strong blow from one of the ends may also help. You can also use a specific chemical product to unclog pipes, following the manufacturer's instructions. Once you have unclogged the drain, reconnect the hose and ensure it is securely fastened.
6. Repeat all the previous steps if the problem persists: Review everything we have instructed you to do, make sure to follow each step precisely. If you have applied all the above solutions and the E24 error code continues to appear on your Bosch dishwasher, it indicates there may be another issue that you cannot resolve on your own.
7. Seek assistance from Bosch technical support to find a solution to the problem: If none of the above solutions has worked, it is likely that your dishwasher has a more complex problem that requires the expertise of a professional. If so, contact Bosch's technical support and request a visit from a qualified technician to your home. We are confident that Bosch will diagnose the problem, provide an accurate quote, and repair your dishwasher with all available guarantees.

In summary, the E24 error code on Bosch dishwashers indicates there is a problem with water drainage. The possible causes are:

• A blockage in the drainage pump
• Your dishwasher's filter is very dirty
• A bent or damaged hose
• An obstruction or a clogged drain

The possible solutions you can apply to resolve the E24 error code on your Bosch dishwasher may include the following:

• Restart the dishwasher to reset the sensors
• Clean the drainage pump of your dishwasher
• Clean your dishwasher's filter with a soft-bristle brush and warm water
• Inspect your dishwasher's hoses
• Unclog the dishwasher's drain
• Repeat all the previous steps if the problem is persistent
• Seek assistance from Bosch technical support to find a solution to the problem

If you follow these steps, we are confident that you can resolve the E24 error code and enjoy your Bosch dishwasher without issues. Please remember to perform preventive maintenance on your dishwasher regularly to avoid such errors and extend its lifespan.