Error E25 Dishwasher Bosch

What is the fault of error E25 Bosch affecting your dishwasher?

Bosch dishwashers are synonymous with excellence and quality, but they are not exempt from damage or mishaps, mostly caused by a lack of preventive maintenance or prolonged misuse.

If you're here, it's probably because you have a Bosch dishwasher, and the E25 error code has appeared on the screen. The E25 error code indicates a problem with the drainage pump of your dishwasher. This means that water cannot exit the appliance properly and accumulates inside. This can lead to the dishwasher not functioning properly, making noise, or stopping during the wash cycle.

Today, we will try to explain what this error means, its possible causes, and how you can easily and quickly fix it. So, you have nothing to worry about. Below are the possible causes that may trigger the E25 error code on your dishwasher:

• The drainage pump is blocked or obstructed by a foreign object, such as food debris, paper, plastic, or any other item that may have fallen into the dishwasher.
• The drainage pump cover is not properly placed or is damaged. This can prevent the pump from rotating correctly and the water from exiting the dishwasher.
• The drainage tube or hose is bent, crushed, or clogged. This can impede the flow of water and create excessive pressure on the pump.
• The pump filter is dirty or clogged. This can reduce the pump's performance and cause water not to drain properly.

How to fix error E25 in Bosch dishwasher?

To find a solution to error code E25 on your Bosch dishwasher, you can follow these steps below:

1. Restart the dishwasher to reset the sensors: Let's start with the simplest solution, which is to restart your dishwasher to refresh the appliance's sensors. To do this, disconnect the dishwasher from the electrical outlet for a few minutes and then reconnect it. This may make the error disappear if it is a temporary glitch.
2. Check the drainage pump and remove any objects that may be blocking it: To do this, you'll need to open the dishwasher door, remove the bottom filter, and access the pump cover, usually located at the back of the appliance's bottom. Turn the cover counterclockwise and carefully remove it. Then, check if there is any object inside the pump and remove it with tweezers or by hand. Replace the cover and make sure it is securely fastened.
3. Inspect the drainage tube or hose and ensure they are not bent, crushed, or clogged: You'll have to remove the bottom panel of the appliance and locate the drainage tube or hose, usually connected to the pump. Check for any obstruction or damage in the tube or hose and correct it if necessary. Reconnect the dishwasher to the water supply and the electrical outlet.
4. Clean the pump filter and remove any dirt or residue that may be blocking it: To do this, follow the same steps as in the previous point to access the drainage pump. Then, you'll need to remove the pump filter, usually snugly fitted at its entrance. Clean the filter with warm water, a soft-bristle brush, soap, a bit of vinegar, and place it back in its position.
5. Repeat all the previous steps if the problem persists: Make sure to follow all the steps carefully, and if you haven't been able to resolve the issue, then perform a second check of all the steps described earlier. If, after all the checks and cleanings, the E25 error code continues to appear, there may be a more serious problem with your dishwasher.
6. Seek assistance from Bosch technical support to resolve the issue: If none of the above works, and you haven't been able to fix the E25 error code on your own, it's best to contact Bosch's technical support for a professional inspection and repair of your dishwasher if necessary. We are confident that you will be in good hands with them; a qualified technician will provide an accurate diagnosis of this issue and offer an effective and guaranteed solution.

In summary, the E25 error code indicates that there is an issue with the drainage pump and/or drain in your Bosch dishwasher. Possible causes include an obstruction or malfunction of the pump, tube, hose, or drainage filter. The potential solutions can be summarized as follows:

• Restart the dishwasher to reset the sensors
• Check the drainage pump and remove any object that may be blocking it
• Inspect the drainage tube or hose and ensure they are not bent, crushed, or clogged
• Clean the pump filter and remove any dirt or residue that may be blocking it
• Repeat all the previous steps if the problem persists
• Seek assistance from Bosch technical support to resolve the issue

And there you have it! Essentially, that's all you need to do to fix the E25 error code on your Bosch dishwasher. Sometimes, just completing step 1 is enough to resolve the problem. Remember to keep up with regular preventive maintenance for your dishwasher to prolong its lifespan. Good luck, and thank you for reading this far!