Error H24 Dishwasher Bosch

What is the failure of the H24 Bosch error affecting your dishwasher?

If the H24 error code has appeared on your Bosch dishwasher and you don't know what it means or how to fix it, there's no need to panic or fear this problem. Today, we'll explain everything you need to know about this code and how to get your dishwasher back to working correctly.

The H24 error code is not an error per se! Instead, it's a notice from the dishwasher indicating that it's in a 24-hour standby mode. This means the dishwasher won't start until 24 hours have passed since the timer was activated.

The timer is a function that allows you to schedule the start of the wash in advance. However, if you've set it by mistake or don't need it, you'll have to deactivate it to use the dishwasher. The possible causes of the H24 error code on your Bosch dishwasher could be:

• You've set the timer for the dishwasher to start within 24 hours.
• You've accidentally touched the timer and activated it unintentionally.
• The timer has been activated due to a power fluctuation or power outage.

The good news is that this error code is more of a notification from your dishwasher that the timer is activated, so you don't need to worry too much about it.

How to fix the H24 error on the Bosch dishwasher?

We are going to leave you here the possible solutions to eliminate the H24 error code from your Bosch dishwasher. You can try to apply them yourself, before having to call Bosch technical service:

1. Manually deactivate the timer: Consult your dishwasher's instruction manual and follow the steps to cancel the timer programming. Usually, it's as simple as pressing a button or a combination of buttons until the timer light on the control panel turns off.
2. Restart the dishwasher to reset the sensors: If you can't find the manufacturer's manual for your Bosch dishwasher or locate how to deactivate the timer, let's try restarting the dishwasher. Disconnect the dishwasher from the power outlet for a few minutes and then reconnect it. This should deactivate the timer and make the dishwasher operate normally.
3. Repeat all the previous steps if the problem persists: Double-check everything mentioned, and make sure to follow the manufacturer's manual instructions precisely. If, after restarting the dishwasher or deactivating the timer, the H24 error code continues to appear, try repeating the previous solutions one or more times until the problem is resolved.
4. Seek assistance from Bosch technical support to resolve the issue: If you haven't been able to solve this problem on your own, and none of the above solutions work, there may be a more serious issue with the dishwasher or the timer. In that case, it's best to contact Bosch technical support and request an inspection or repair of the appliance.

In summary, the H24 error code indicates that the dishwasher is in a 24-hour standby mode due to a timer setting. The reasons for this notification or error code may include an incorrect timer configuration. To resolve it, you can manually deactivate the timer following the manufacturer's instructions, restart the dishwasher, repeat these solutions if necessary in case the problem persists, or seek assistance from Bosch technical support.