Error E1 Induction plaque Bosch

What is the failure of the Bosch Error E1 affecting your induction cooktop?

Do you have a Bosch induction hob or ceramic cooktop, and the Error Code E1 has appeared on the screen? If so, it's time to find a solution to this problem, and you are in the right place for that.

The E1 error code indicates that there is a problem with the electronic PCB board of your Bosch induction cooktop. The PCB board is responsible for controlling the entire operation of the sensors, buttons, and display of your appliance. If this board is damaged or experiences a short circuit, it can cause your induction cooktop to malfunction or shut off suddenly.

The unfortunate news is that fixing this issue can be somewhat complicated. However, to help you understand the root of this problem, we will provide you with the possible causes that may trigger the E1 error code on your Bosch induction cooktop:

• An electrical overload that has affected the electronic PCB board.
• A poor connection or a loose cable between the electronic PCB board and the other components.
• Excessive moisture or a liquid spill on the electronic PCB board.
• Wear or failure of the electronic PCB board due to prolonged or incorrect use.

How to troubleshoot the Error E1 of the Bosch induction cooktop?

In order to resolve the E1 error code on Bosch induction cooktops, you would need to follow these steps, explained in detail:

1. Restart your induction cooktop to reset the sensors: To do this, disconnect the induction cooktop from the power outlet for a few minutes and then reconnect it. This may help reset communication between the electronic PCB board and the other components.
2. Check the connections and cables between the electronic PCB board and the other components: Ensure that the wiring is in perfect condition. Thoroughly check for any loose, broken, torn, cut, burned, or scorched cables. If you find any issues, replace the damaged cable or adjust the connection.
3. Dry the electronic PCB board thoroughly if there is moisture or liquid on it: Use a soft, dry cloth to clean the surface, and avoid using abrasive or corrosive products that may damage it. You can also use a hairdryer to assist with this task. Additionally, use an electronic cleaner to perform maintenance on the electronic board. Allow it to dry completely before turning on your induction cooktop again.
4. Repeat all the previous steps and make sure to follow everything precisely if the problem persists: It wouldn't hurt to double-check everything we've described earlier. If the E1 error code continues to appear after these actions, the electronic PCB board may be completely damaged and need replacement.
5. Request a review of your induction cooktop with Bosch technical support: If none of the above solutions work, it's advisable to contact Bosch's official technical support to have them inspect your appliance and provide an appropriate solution. They may need to replace the electronic PCB board with a new one or repair it if possible.

In summary, the E1 error code indicates that there is a problem with the electronic PCB board of your Bosch induction cooktop. Possible causes include electrical overload, poor connection, excessive moisture, or wear of the board. To address this issue, you can:

• Restart your induction cooktop to reset the sensors
• Check the connections and cables between the electronic PCB board and the rest of the components
• Dry the electronic PCB board thoroughly if there is moisture or liquid on it
• Repeat all the previous steps and make sure to follow everything precisely if the problem persists
• Request a review of your induction cooktop with Bosch technical support

We hope this article has been helpful, and you have been able to resolve the E1 error code on your Bosch induction cooktop. This issue can be somewhat challenging to address, but with patience, you may find the right solution. Good luck, and until next time!