Error E15 Washing machine Bosch

What is the fault of the E15 Bosch error affecting your washing machine?

When we talk about Bosch washing machines, we know we're referring to products of very high quality. However, without exception, these appliances can experience system malfunctions or internal component defects. That's why Bosch has come up with error codes displayed on their appliances' screens to help you decipher any issues that might be occurring.

The E15 error code on Bosch washing machines indicates that there is a water leak in the washer, and the appliance's leak protection system has been activated. This protection system prevents the washing machine from operating correctly, but at the same time, it prevents more significant damage to your appliance.

The potential causes of the E15 error code on your Bosch washer can be varied, but we'll list here the most common ones we've gathered for you:

• A hose or a gasket is broken or loose, causing water to escape from the entire system of your washer.
• The pump filter is clogged or dirty, preventing water from draining, causing it to accumulate and eventually overflow within your washer's system.
• The water leakage sensor is faulty or dirty, triggering it without apparent reason, leading to the appearance of the E15 error code on your washer.
• The water pressure is either too low or too high, leading to water leakage, and consequently, this error occurs.

How to fix the E15 error in your Bosch washing machine?

This type of issue is completely reparable, and the best part is that before having to call a technician, we could try to solve this problem on our own. To resolve the E15 error code on Bosch washing machines, you can follow these steps:

1. Restart the washing machine to reset the sensors: Sometimes, a simple reset can be the solution to all our problems. Disconnect the washing machine from the power outlet, wait for a few minutes, and then plug it back in. Now, turn it on and select a short washing cycle. Check if the error has disappeared.
2. Use less foam or a detergent suitable for your washing machine: Foam is the enemy of the sensors in your washing machine. If you're using too much detergent, generating excessive foam that the washing machine simply can't control, then the sensors might go haywire. Try using a detergent suitable for laundry and don't overdo it with the quantity.
3. Check the hoses and gaskets of the washing machine: Make sure there are no broken, loose, or incorrectly installed hoses. If you find any water leakage, you'll need to replace or secure the damaged part properly to prevent leaks throughout the system.
4. Clean your washing machine's water filters: Locate all the filters your washing machine may have, including those for water inlet and outlet, as well as the pump filter. Carefully remove them and clean with warm water and a bit of vinegar. Remove any objects or debris that may obstruct water drainage. Use a soft-bristle brush to perform this procedure gently to avoid damaging the filter screens. To access these filters, consult your washing machine's instruction manual, as it should contain more information about them.
5. Clean the water leak sensor: Perform preventive maintenance on this sensor with an electronic cleaner. Remember that foam is your washing machine's sensor's worst enemy. Remove any residue that could interfere with its proper functioning. This sensor is usually located at the bottom of the washing machine, near the filter.
6. Adjust the water pressure according to the manufacturer's instructions: You can use a pressure gauge to measure the pressure and a wrench to adjust it. The ideal water pressure is usually between 1 and 5 bars. If you notice that the pressure is inadequate, you'll need to adjust the faucet and the water supply to your washing machine.
7. Repeat all the previous steps if the problem persists: You may need to perform several tests to identify the exact cause of the error. That's why we recommend repeating all the steps we described earlier if the problem persists.
8. Contact Bosch's technical support to find a solution to the problem: If none of the previous steps work, there may be a more serious issue with the washing machine, and you'll need the assistance of a qualified professional. Give Bosch's technical service a call and request advice and a visit from their team. We're confident they will assist you in the best possible way and find a solution to your problem.

In summary, and to conclude our tips guide: The E15 error code on Bosch washing machines is an indication that there may be a water leak in your washing machine. To resolve the E15 error code, you should follow these steps:

• Restart the washing machine to reset the sensors
• Use less foam or a detergent suitable for your washing machine
• Check the hoses and gaskets of the washing machine
• Clean your washing machine's water filters
• Clean the sensor responsible for detecting water leaks
• Adjust the water pressure according to the manufacturer's instructions
• Repeat all the previous steps if the problem persists
• Contact Bosch's technical support to find a solution to the problem

We hope this article has been helpful, and you've been able to resolve the E15 error code on your Bosch washing machine. Remember that a water leak can be very problematic if not addressed promptly. Water can reach parts of your washing machine that can be sensitive to contact with liquids and become permanently damaged, so address this issue as soon as possible. Thanks for reading, good luck, and happy washing!