Select your language

Error E19 Washer Bosch

error e19 washer bosch

What is the breakdown of the Bosch E19 error affecting your washer?

Have you noticed that your Bosch washing machine isn't heating water properly and displays the E19 error code on the screen? That's what this issue is about, and we're going to find a solution. We've prepared a guide of tips for you, and if you follow it to the letter, you'll be able to resolve this problem without any issues.

The E19 error code indicates that the washing machine has exceeded the water heating time and hasn't been able to correct it by itself. This fault can appear in your washing machine due to several reasons, which we'll mention below:

  • A problem with the thermostat, which doesn't regulate the temperature correctly.
  • A problem with the heating element, which doesn't heat the water sufficiently.
  • A problem with the temperature sensor, which doesn't detect the actual water temperature.
  • A problem with the electronic PCB board, which doesn't send the correct signals to the components.
  • A problem with the electrical supply, causing power cuts or voltage drops.

If you want to continue using your washing machine, you can skip using hot water in the washing cycles and only use cold or lukewarm water. However, this is not the definitive solution to the problem, so we recommend having your washing machine inspected.

How to fix the Bosch washer E19 error?

The good news about this issue is that your Bosch washing machine is not completely unusable by any means. To resolve error code E19 on Bosch washing machines, you can follow these steps provided below:

  1. Restart the washing machine to reset the sensors: Let's start with the simplest step - rebooting the appliance. To do this, unplug the washing machine from the power source for a few minutes and then plug it back in. Now, check if the error has disappeared by running a hot water cycle. This procedure resets the sensors in your washing machine, so it makes sense to begin with this one.

  2. Check the operation of the thermostat and the heating element: To inspect these components, you'll need to access the interior of the washing machine and locate them. You can use a multimeter to measure the resistance and continuity of the thermostat and the heating element. If either of them is damaged or defective, you'll need to find a replacement.
  3. Check the operation of the temperature sensor: Locate the sensor, which is usually near the heating element, and use a multimeter to check its continuity. You'll need some electronics knowledge to detect any issues with this sensor.
  4. Check the operation of the PCB electronic board: Disassemble the PCB electronic board from your washing machine and inspect its connections and components using a multimeter. If you see any signs of burning, corrosion, or damage, you'll need to replace the board with a new one.
  5. Check the electrical supply to your washing machine: To do this, you'll need to ensure that the plug and power cable of the washing machine are in good condition and there are no power cuts or voltage drops in your electrical network. If there is an issue, you'll need to address it yourself, call an electrician, or contact your electric company.
  6. Repeat all the previous steps if the problem persists: If the error continues to appear after performing all the checks and repairs, you'll need to repeat the entire process from the beginning to ensure that you haven't missed anything. Be sure to follow all the steps meticulously.
  7. Contact Bosch's technical support to resolve the problem: If the error isn't resolved after all the previous steps, then you'll need to get in touch with Bosch's official technical service. Schedule an appointment with them so that a qualified professional can inspect your washing machine and provide a definitive diagnosis along with a timely solution.

In summary, error code E19 on Bosch washing machines indicates a problem related to water temperature. This issue may originate from a defective sensor, problems with a heating element, or thermostat failures. Therefore, to resolve error code E19 on your Bosch washing machine, you need to do the following:

  • Restart the washing machine to reset the sensors
  • Check the operation of the thermostat and the heating element
  • Check the operation of the temperature sensor
  • Check the operation of the PCB electronic board
  • Check the electrical supply to your washing machine
  • Repeat all the previous steps if the problem persists
  • Contact Bosch's technical support to resolve the problem

We hope this article has been helpful, and that you have been able to resolve error code E19 on your Bosch washing machine. Remember that depending on the model of your washing machine, you may still be able to use it even with this error code, as long as you never select hot water in the wash cycles. Goodbye!

¿Te ha servido este artículo? Por favor déjanos tu Voto