Error E35 Washer Bosch

What is the fault of Bosch error E35 affecting your washing machine?

Have you noticed that your Bosch washing machine is not functioning correctly and displaying the error code E35 on the screen? If so, you have nothing to worry about because in this article, we will explain what this error could mean, its potential causes, and how you could solve it practically and easily.

The E35 error code in Bosch brand washing machines indicates that there is a water leak at the base of the washer or in its bottom part. This can cause the machine's sensors to detect excessively high water levels, leading to the disruption of your appliance's normal operation. Furthermore, if water accumulates at the base, it could damage other electrical or mechanical components of the washer, so you must address this situation as soon as possible.

Among the potential causes that can lead to the E35 error code appearing on your Bosch washer are the following:

• A broken or improperly connected inlet or outlet water hose, leading to water leakage inside or outside the washer.
• A worn-out or faulty seal or gasket on the door or drum, allowing water to enter the machine.
• An obstructed drain filter or pump, preventing proper water drainage and causing it to return to the washer's interior.
• An excess of detergent or fabric softener causing excessive foam and water overflow through the door or filter.
• An issue with the PCB electronic board or water level sensors providing incorrect readings, triggering the E35 error code.

How to solve Bosch washing machine error E35?

Fortunately, this type of error can have a quick and easy solution. To resolve the E35 error code on your Bosch washer, you can follow these steps that we'll explain below:

1. Reset the washer to clear the sensors: It's possible that the sensors have gone awry, especially if you've been using excessive detergent or fabric softener in your recent washes. Excessive foam can be the nemesis of your washer's sensors, so let's reset them with a few simple steps. To do this, disconnect the appliance from the power source for a few minutes, then reconnect it. Now, turn it on and check if the error has completely disappeared or if it persists. If the error persists, keep reading, and we'll find a solution.
2. Avoid excessive detergent or softener: Please try not to use too much of these products or get a product suitable for your washer. Use a detergent specifically designed for washing clothes in a washer. Excessive foam can interfere with your washer's sensors, causing false positive errors. Follow the manufacturer's instructions and use the appropriate dose based on the type and amount of laundry you're washing.
3. Check the inlet and outlet water hoses: Ensure they are not broken, cracked, bent, or poorly connected. If necessary, replace damaged hoses or tighten all the washer's connections.
4. Inspect the door and drum seal or gasket: Make sure these seals are not worn, torn, or deformed. If necessary, replace the seal or gasket with a new one.
5. Clean the drain filter and pump: Remove the filter plug and extract any foreign objects that may be obstructing the water flow. Filters and pumps tend to accumulate scale from the water, clothing lint, and even objects like coins and buttons. Perform preventive maintenance on both the filter and pump, using a soft-bristle brush, warm water, and a bit of vinegar.
6. Repeat all the previous steps if the problem persists: If the E35 error code continues to appear after performing all the checks and cleaning, there may be a more serious problem with the washer. It might be time to leave the matter in the hands of experts. Perform a second check of everything we've previously indicated, and if the problem persists, proceed to the next step.
7. Contact Bosch technical support to resolve the issue: If you have followed all the previous steps and still haven't found a solution to the problem with your Bosch washer, it's time to entrust the matter to a qualified professional. Get in touch with Bosch's official technical service and request a visit from a specialized technician. We are confident they can diagnose and repair the issue with the appropriate tools and spare parts.

In summary and to conclude our tips guide, the E35 error code on Bosch washers is a signal that there is a leak at the bottom of your washer. To resolve the E35 error code, you would need to perform the following steps:

• Reset the washer to clear the sensors
• Avoid excessive detergent or softener
• Check the inlet and outlet water hoses
• Inspect the door and drum seal or gasket
• Clean the drain filter and pump
• Repeat all the previous steps if the problem persists
• Contact Bosch technical support to resolve the issue

We hope this article has been helpful, and that you have been able to resolve the E35 error code on your Bosch washer. Remember to perform preventive maintenance on your washer regularly; this way, we are confident that you will extend its lifespan. Thank you for reading, and have a happy laundry day!