Error E36 Washer Bosch

What is the breakdown of the E36 Bosch error affecting your washer?

You're here because your Bosch washer is displaying the E36 error code, and you're not sure what to do! Don't worry; we've prepared a handy guide with useful tips to help you find a definitive solution to this problem.

Let's explore the possible causes that generate this E36 error code on your Bosch washer and how you can resolve it quickly and easily. This error indicates that there is an issue with the water drainage in the washer. This could be due to various reasons, such as:

• The pump filter may be obstructed by dirt, lint, or a foreign object
• The drain hose may be bent, crushed, or blocked
• The drain pump may be damaged or clogged with dirt, lint, or a foreign object
• The water level sensor may be dirty or faulty
• The PCB electronic board may be damaged or improperly connected

How to solve the E36 error on your Bosch washer?

Fortunately, this type of problem can have a quick and easy solution. You can even try to resolve this issue yourself. To fix the E36 error code on your Bosch washer, you'll need to follow the steps we outline below:

1. Restart the washing machine to reset the sensors of your washer: First, we need to rule out a sensor configuration issue. To do this, unplug the washing machine from the power outlet for a few minutes and then reconnect it. If the error persists, proceed to the next step.
2. Check the pump filter and perform preventive maintenance: To access the filter, open the lid located at the front bottom of the washer and turn the plug to the left. Remove the filter and clean it with a soft-bristle brush, warm water, and a little vinegar. If you find foreign objects in the filter, remove them immediately. Now, reinsert the filter and close the lid.
3. Inspect the drainage hose of your washer: Ensure that this hose is not bent, crushed, or blocked. If necessary, unscrew the hose from the end that goes to the drain and clean any obstructions it may have inside. To do this, use a soft-tipped wire, insert it from one end, and clean the hose from end to end. Now, reconnect the hose properly.
4. Check the drainage pump and ensure it is not broken or blocked: To access the pump, you will need to disassemble the washer's panel and locate the pump, which is usually at the bottom right. Disconnect the cables and hoses leading to the pump and remove it. Check for any jammed objects or signs of damage to the pump. If necessary, replace the pump with a new one.
5. Inspect the water level sensor and ensure it is not damaged or dirty: To access the sensor, you will need to disassemble the washer's top panel and locate it, usually at the upper right. Disconnect the cables going to the sensor and carefully remove it. Check for any dirt residue on the sensor or signs of damage. Perform preventive maintenance with a bit of electronic cleaner. If necessary, replace this sensor with a new one.
6. Check the electronic PCB board and ensure it is not damaged or poorly connected: You will need a multimeter for this and some electronics knowledge. To access it, you will need to disassemble the front panel of the washer and locate the board, usually at the upper left. Check for any burnt or damaged components on the board or any loose or disconnected wires. Also, check the continuity of the board and all its components. If necessary, repair or replace the PCB board with a new one.
7. Repeat all the previous steps only if the problem persists: Perform a second check of everything we've mentioned earlier. If after performing all the checks and repairs, the error continues to appear, it may be a more serious issue requiring the assistance of a professional technician.
8. Turn to Bosch's technical service to resolve the issue: If you cannot resolve the E36 error code on your own and have followed all the steps we've outlined, it's best to contact Bosch's official technical support and request an in-home visit. Who better than Bosch's technical support to take care of your washer? We are confident that they can diagnose and repair your washer with warranty and security.

In summary, the E36 error code in Bosch washing machines indicates a problem with the drainage and/or discharge of the washer. It signifies an accumulation of water that could be harmful to the internal components, and you must address it immediately to prevent more serious damage in the future. To solve the E36 error code on your Bosch washer, we recommend the following:

• Restart the washer to reset its sensors.
• Check the pump filter and perform preventive maintenance.
• Inspect the washer's drainage hose.
• Examine the drainage pump to ensure it's not damaged or blocked.
• Review the water level sensor for damage or dirt.
• Verify the condition of the PCB electronic board, ensuring it's not damaged or improperly connected.
• Repeat all the previous steps only if the problem persists.
• Contact Bosch's service center to resolve the issue.

We hope our article has been very helpful in resolving the E36 error code on your Bosch washer. Regular preventive maintenance can prevent these situations and extend the life of your washer for a long time. Thank you for reading this far, and we wish you happy washing!