Error F34 Washer Bosch

What is the fault of the Bosch F34 error affecting your washing machine?

Do you have a Bosch washing machine, and you've encountered the F34 error code? Don't worry; we'll explain what this error means, what its possible causes are, and how you could resolve it without significant inconvenience.

The F34 error code indicates that there's a problem with the door lock or latch in your washing machine. This issue can prevent the washing machine from operating correctly or cause it to stop mid-cycle. It's an error that can have both mechanical and electronic origins, so several aspects need to be checked to find the appropriate solution.

Here is a list of possible causes of the F34 error code in Bosch brand washing machines and how you can check them:

• The door isn't properly closed: This is the simplest and most common cause of the F34 error. Sometimes, the door may not close properly due to an obstruction, such as a piece of clothing.
• The door latch is damaged or dirty: The latch is the mechanism that locks the door when the washing cycle starts. If the latch is broken, worn out, or dirty, it can prevent the door from closing properly and trigger the F34 error.
• The door switch is faulty: The switch is the electronic component that detects whether the door is closed or not. If the switch is malfunctioning, it can send incorrect signals to the washing machine, leading to an F34 error as a false positive.
• The electronic PCB board is damaged: The electronic PCB board is the brain of the washing machine and controls all its functions. If the board is damaged, it can cause sensor and electronic component failures, including the door switch and latch.

How to resolve the Bosch washing machine F34 error?

Now that you know the possible causes of error code F34, we show you a list of possible solutions and how you can apply them yourself. Remember that you can always call or go to a Bosch technical service to support you with this issue:

1. Restart the washing machine to reset the sensors: This is the simplest and most effective solution for many electronic errors, so let's start here. Disconnect the washing machine from the power outlet for a few minutes. Once the time has passed, reconnect it and turn it on again. Now, check if the error has disappeared. This way, the sensors are reset, and the F34 error code is cleared.
2. Open and close the door of your washing machine firmly: This solution is to check if the door is properly closed and if the latch is functioning correctly. Open and close the door several times with force, making sure there's nothing obstructing it from closing properly.
3. Clean the washing machine latch with a damp cloth: Remove any dirt or residue that may be obstructing the latch's operation. Clean the latch thoroughly with a damp cloth and dry it before closing the door again.
4. Check the door latch switch in your washing machine: This component can become corroded over time or may malfunction due to excessive foam in your washing machine. Check this switch and perform some preventive maintenance with an electronic cleaner.
5. Inspect the PCB electronic board: Use a multimeter to check for damage to the components that make up the electronic board of your washing machine. Disconnect the washing machine from the power and access the electronic board, which is typically located behind the rear panel of the washer. Examine the electronic board for signs of burns, short circuits, or moisture. Also, check if the components have continuity with a multimeter; for this, you'll need some electronics knowledge. If any visible damage is observed, you'll need to replace the electronic board with a new one.
6. Repeat all the previous steps if necessary: Make sure you have correctly performed all the checks and solutions mentioned earlier. If necessary, repeat everything and verify if the F34 error code has completely disappeared.
7. Contact Bosch technical support to find a definitive solution: If the F34 error code is not resolved with any of the previous solutions or when you need to replace a part that is not readily available, it is advisable to contact Bosch's technical support. Request a home visit from one of their technicians, and we are confident they will resolve the problem in record time.

In summary, the F34 error code in Bosch brand washing machines tells us that there is an issue with the door and/or the door latch mechanism. To find a solution to this problem, you can try the following remedies we have provided below:

• Restart the washing machine to reset the sensors
• Open and close the door of your washing machine firmly
• Clean the washing machine latch with a damp cloth
• Check the door latch switch in your washing machine
• Inspect the PCB electronic board
• Repeat all the previous steps if necessary
• Contact Bosch technical support to find a definitive solution

And that's it! Thank you for reading up to this point. We hope we've been helpful in resolving this issue and that you've found the solution you were looking for. Remember to keep your washing machine's maintenance up to date to ensure its optimal operation and extend its lifespan. Goodbye and happy washing!