Error F57 Washer Bosch

What is the fault of the F57 Bosch error affecting your washing machine?

Are you in the middle of doing your laundry when suddenly an alarm with a warning appears on your washing machine? If you have a Bosch washing machine and the F57 error code suddenly appears on the screen, there's no need to panic. We're here to explain what this error code might mean and how you can resolve it while also preventing it in the future.

This code indicates that there's a problem with the rotation system or the washing machine's motor, which triggers the lock system to prevent further damage to the appliance. In this article, we will explain what this error could signify, its potential causes, and how we'll address it.

The F57 error code occurs when the washing machine detects an abnormality in the operation of the motor or the rotation system. This can be due to various reasons, such as:

• Overloading in the drum
• Imbalance in the distribution of laundry
• Obstruction or dirt in the drainage pump filter
• A speed sensor failure in the motor
• A failure in the electronic PCB board
• A motor failure or a problem with its electrical wiring

All of these causes have solutions that can be applied, even the most severe one involving the motor. So don't worry, you just need to follow the steps we'll provide, and it's highly likely that your washing machine will be back to normal without any issues by the end of the day.

How to fix the F57 error on the Bosch washing machine?

We are going to leave you here a list of tips and advice to solve the F57 error code in Bosch washing machines. Follow all the steps to the letter and as a last option you can always call Bosch technical service to solve the problem:

1. Restart the washing machine to reset the sensors: This procedure is quite simple. Begin by turning off the washing machine and unplugging it from the power outlet. Wait for a few minutes, then reconnect your washing machine, turn it back on, and select a short wash cycle to check if the error has disappeared.
2. Reduce the laundry load in the drum or distribute it better: Sometimes, overloading the drum or uneven distribution of laundry can lead to poor drum rotation or vibrations. Try using less laundry or redistributing it more evenly within the drum, and then start the program again.
3. Ensure that your washing machine is properly leveled: If the washing machine is on an unstable floor and wobbles significantly during the spin cycle, this error code may also appear. Make sure that the floor or surface where the washing machine is placed is level and stable, and not on an uneven or weak surface like planks, ensuring the washing machine is not tilted.
4. Clean the drain pump filter: The filter is located at the front bottom of the washing machine and serves to trap impurities that could obstruct the drainage system. Remove the filter from your washing machine, clean it with warm water and a soft-bristle brush, and then place it back securely. Ensure the lid is closed tightly to prevent leaks.
5. Check the motor speed sensor: The sensor is located at the rear of the washing machine and is responsible for measuring the motor's revolutions and transmitting them to the electronic PCB board. To access it, you'll need to remove the rear panel of the washing machine and locate the sensor, which is typically connected to the motor by a cable. Ensure that the cable is securely connected and that there is no visible damage to the sensor. If you see any signs of deterioration, you'll need to replace it with a new one.
6. Inspect the electronic PCB board of your washing machine: The electronic PCB board is the brain of the washing machine and controls all its functions. It is located at the top front of the washing machine, behind the control panel. Remove the front panel and locate the board. Use a multimeter to check that all cables are properly connected and that there are no burnt, damaged, or sulfated components. If you see signs of malfunction, you can try cleaning the board with electronic cleaner or an ultrasound cleaner. In extreme cases, you may need to replace the board with a new one.
7. Give your washing machine's motor a thorough inspection: Check the motor's brushes and perform maintenance if necessary. Also, please inspect the wiring of your washing machine's motor and ensure that these wires are not burnt, scorched, broken, or poorly connected. Perform general maintenance on the electrical connections of your motor using electronic cleaner, and replace the brushes if needed.
8. If the problem persists, you can repeat all the previous steps: If the F57 error code continues to appear after following all the previous steps, there may be a more serious or challenging-to-detect issue. In that case, we recommend that you repeat all the steps with extra care and attention to ensure nothing has been overlooked.
9. Contact Bosch technical support to resolve the issue: If, after repeating all the previous steps, the F57 error code remains unresolved, it's likely that there is an internal fault in the washing machine that requires professional intervention. In such cases, it's best to contact Bosch's technical service and request an on-site visit. They can diagnose the problem accurately and perform the necessary repairs using original parts, and most importantly, they are likely to provide a warranty for the work performed.

In summary, the F57 error code in Bosch washing machines indicates there is a problem with the motor or the rotation system of the washing machine. To resolve it, you need to follow these steps (very briefly summarized) below:

• Restart the washing machine to reset the sensors
• Reduce the laundry load in the drum or distribute it better
• Ensure that your washing machine is properly leveled
• Clean the drain pump filter
• Check the motor speed sensor
• Inspect the electronic PCB board of your washing machine
• Perform a comprehensive check of your washing machine's motor
• If the problem persists, you can repeat all the previous steps
• Contact Bosch technical support to resolve the issue

We hope this article has been helpful, and that you've been able to resolve the F57 error code on your Bosch washing machine. Remember that proper preventive maintenance and keeping your washing machine up to date can prevent such situations. Good luck and happy washing!