Error F63 Washer Bosch

What is the breakdown of the F63 error in your Bosch washing machine?

If you have a Bosch washing machine and see the F63 error code on the display, you might be wondering what it means and what to do about it. In this article, we will explain what this error code is all about, its possible causes, and how to resolve it effectively for you and your washing machine.

The F63 error code in Bosch washing machines indicates that there is an issue with the electronic control board PCB module of the washer, which is responsible for controlling all the appliance's functions. This problem can be due to various reasons, such as a module failure, poor cable connections, or even a short circuit on the board.

Among the possible causes that can lead to this type of error on your washing machine, we can tell you about the following:

• The module of the electronic control board PCB is faulty or damaged due to impact, moisture, or electrical overload.
• The cables that connect the module to the rest of the washing machine components are loose, damaged, or improperly connected.
• There is a short circuit at some point in the electrical circuit of the washer, which can affect the module or other elements like the motor, pump, or heating element.

How to solve the F63 error in your Bosch washing machine?

The good news is that this type of error has a solution, so let's find it. To solve the F63 error code on your Bosch washing machine, you can follow these steps below:

1. Reset the washer to reset the sensors: Let's start with this simple step that you can complete in just 15 minutes. Unplug the washer from the electrical outlet, wait a few minutes, and then reconnect it. Turn it on and select a short wash cycle to check if the error has disappeared.
2. Check the PCB electronic control board module with a multimeter: You'll need to remove the washer's rear panel and locate the module, which is typically at the top. Using a multimeter, check for continuity between the module's terminals and for any burned, damaged, or sulfated components. If you find sulfate deposits on any part of the board, perform maintenance with electronic cleaner and a soft-bristle brush. If you have electronics knowledge and don't detect continuity between the board's components, it's likely the board is damaged and needs replacement.
3. Inspect the washer's general wiring and the electrical supply: To do this, follow the wires that come from the module and check if they are properly connected, if there are any cuts, or if there are signs of burns or corrosion sulfate. If you find any defective wires, you will need to replace them with new ones. Additionally, ensure that the electrical supply to your washer is correct and as specified by the manufacturer.
4. If the problem persists, try repeating all the previous steps: Make sure to follow all the steps to the letter and repeat all the steps we mentioned earlier if necessary. If after resetting the washer, checking the module and wiring, and performing maintenance on the electronic board, the F63 error code still appears, there may be another damaged component or the problem could be more complex than expected.
5. Contact Bosch technical support to find a solution to the problem: If you can't resolve the F63 error code on your own, it's time to seek a qualified professional to help with your washer's issue. In this case, the best course of action is to get in touch with Bosch's official technical service and request a visit from a professional technician who can accurately diagnose the problem and repair your washer using original parts and the corresponding warranty.

In summary, the F63 error code in Bosch washers is due to a problem with the electronic control board module (PCB) of your washer, which can have various possible causes. To resolve this issue, you can do the following:

• Reset the washer to reset the sensors
• Check the electronic control board module with a multimeter
• Inspect the general wiring of the washer and the electrical supply
• If the problem persists, try repeating all the previous steps
• Contact Bosch technical support to find a solution to the problem

That's basically it! We hope we've helped you resolve the F63 error code on your Bosch washer. Fortunately, this is a repairable issue, and you don't have to replace your washer due to this problem that has occurred. Give it a little care and effort, and we're sure you'll be able to fix this issue sooner rather than later. Until next time!