Brother Printer Error 36

What is the failure of error 36 Brother affecting your printer?

If you have a Brother printer and the error code 36 appears on the screen, don't panic. This error indicates a high voltage issue in the printer, which can affect its operation and durability. In this article, we will explain what the error code 36 is, its possible causes, and how to effectively and easily resolve this problem.

Error code 36 is a message displayed by the Brother printer when it detects a high voltage problem internally. This means there is an excess of electrical current that can damage internal components such as the power supply, wiring, or the PCB (Printed Circuit Board).

This issue with your Brother printer often occurs when there is a fluctuation or interruption in the power supply, whether due to a power outage, a faulty power outlet, damaged wiring, or a power surge. It can also result from an internal printer malfunction, such as a short circuit, overheating, or poor connection.

The possible causes for this error code on your Brother printer include:

• A power outage or fluctuation in the power supply affecting the printer.
• A damaged or inadequate power outlet not providing the correct voltage to the printer.
• A damaged or disconnected power cable preventing the flow of electrical current to the printer.
• An overload in the power supply causing a voltage spike in the printer.
• An internal failure in the printer's power supply regulation.
• An internal failure in the printer's internal wiring causing a short circuit or poor connection.
• An internal failure in the printer's PCB (Printed Circuit Board) controlling component operation.

Note: It is important to address this issue as soon as possible to prevent further and more serious damage to your printer. So, let's get to work!

How to fix error 36 on Brother printer?

To solve error code 36 on Brother brand printers, you can follow these steps below:

1. Restart the printer and the computer to reset temporary memories: Sometimes, error code 36 can be temporary and easily resolved with a simple restart. Turn off the printer and unplug it from the power outlet for a few minutes. Also, turn off the computer, though it is not necessary to disconnect it entirely from the power source. Wait a few minutes, then reconnect and power everything back on. Turn on the computer first, followed by the printer. Check if error code 36 has disappeared.
2. Check the power supply to your printer: Ensure there are no power outages or fluctuations that could affect the printer. If there is an issue with the power supply, wait for it to be resolved or find an alternative power outlet. Also, consider that power outlets have a limited capacity, so based on their amperage, consider how many devices you can connect simultaneously.
3. Inspect the power outlet and the power cable: Ensure the power outlet where you connect the printer is in good condition and compatible with the required voltage. If unsure, try a different outlet. Also, inspect the power cable and ensure it is not damaged, broken, or disconnected. If necessary, replace the cable with a new one.
4. Check the power supply, internal wiring, and PCB (Printed Circuit Board): If the previous steps do not work, there may be an internal failure in one of the printer's components. To check, you'll need to carefully open the printer following the manual's instructions. Inspect the power supply and ensure it is not visibly burnt, cracked, or swollen. To check for hidden damages not visible to the eye, use a multimeter and have some advanced knowledge in electronics. Also, check the internal wiring and ensure there are no short circuits or poor connections. Finally, examine the PCB and verify that no components are damaged or loose.
5. Repeat all the previous steps and ensure to follow everything precisely if the issue persists: If after checking all internal components of the printer, error code 36 continues to appear, there may be a detail you missed or something not done correctly. Therefore, we recommend repeating all the previous steps carefully and paying attention to detail. Ensure you follow everything precisely and do not overlook anything.
6. Request a review of your printer with Brother's technical support: If none of the above works, and you've diligently repeated and reviewed everything, then the problem may be more serious than it seems and may require professional intervention. In that case, it's best to leave the issue to the experts. Contact Brother's technical support and request a review of your printer, either at home or take it to an authorized service center. They can accurately diagnose the problem and provide the most suitable solution.

In summary, and to conclude for today: Error code 36 is a high voltage problem in Brother printers. If you don't address this issue promptly, it could cause serious damage to the internal components of your printer. The possible causes that trigger this error on your printer include:

• Power outage or fluctuation in the power supply
• Damaged or inadequate power outlet
• Damaged or disconnected power cable
• Power surge in the electrical supply
• Internal failure in the printer's power supply
• Internal failure in the printer's internal wiring
• Internal failure in the printer's PCB (Printed Circuit Board)

And among its possible solutions, we have the following:

• Restart the printer and the computer to reset temporary memories
• Check the power supply to your printer
• Inspect the power outlet and the power cable
• Check the power supply, internal wiring, and PCB
• Repeat all the previous steps and ensure to follow everything precisely if the issue persists
• Request a review of your printer with Brother's technical support

We hope this article has helped you resolve error code 36 on your Brother printer. Thank you very much for reading this far, good luck, and until next time!