Brother Printer Error TS07

What is the failure of Brother error TS-07 affecting your printer?

If you have a Brother printer and you see the TS-07 error code on the screen, it means there is a problem with the wireless connection. According to the official Brother support website, this error indicates that the printer is not detecting any router or access point with WPS enabled.

But you might be wondering, what is WPS? Well, WPS is a system that allows for easy and secure connection of wireless devices, and the best part is that it is without the need to enter passwords. This makes connectivity much easier and faster between devices, without the hassle of memorizing passwords all the time.

The TS-07 error code on your Brother printer can have several causes, including:

• The router or access point does not have WPS or is disabled.
• The printer is out of range or there is interference in the wireless signal.
• The printer is not configured correctly for the WPS wireless connection.
• There is some issue with the printer's software or hardware.

The good news is that this problem can have a quick and easy solution, so keep reading and stay with us, as we have prepared a list of solutions to fix this issue for you.

How to fix Brother printer error TS-07?

To resolve the TS-07 error code on Brother printers, simply follow these steps outlined below:

1. Restart the printer, router or access point, and computer: Sometimes, a simple restart can solve the problem by resetting the connection and clearing any temporary errors. Occasionally performing this procedure is optimal for your devices, as routers, access points, etc., have internal memory where data is stored. If this memory is not cleared frequently, it can lead to problems due to a memory overflow in the devices. To do this, turn off all your devices and unplug them from the power outlet for a few minutes. Then, reconnect everything, turn them on, and check if the TS-07 error code has disappeared.
2. Bring the printer closer to the router or access point and avoid potential sources of interference: No matter how good your router is, the recommended maximum distance is about 10 meters. Make sure to comply with this requirement, and we promise you'll have an optimal connection between your printer and the router or access point. Also, ensure that there are no obstacles such as other wireless devices, thick walls, or appliances that may negatively affect wireless connectivity.
3. Verify that the router or access point has WPS and that it is enabled: You can consult the user manual or the manufacturer's website for your router or access point to learn how to do this. If it does not have WPS or is disabled, you will need to use another method of wireless connection to connect your devices.
4. Use another method of wireless connection to connect your printer: Don't be disheartened if you have no WPS connectivity; you can always opt for a normal password connection, and you'll be ready to go. To do this, access the connectivity options of your printer and in the Wi-Fi section, look for a wireless network. Now, locate your home or office wireless network and enter the password. You can also use the Brother Connectivity Assistant, which can be downloaded from the website and made much easier from your Windows operating system.
5. Repeat all the above steps and make sure to follow everything to the letter if the problem persists: You may need to repeat everything if the problem persists. Please make sure to follow everything to the letter and not overlook anything. If the problem continues, then you may need to leave the issue in the hands of a qualified professional.
6. Request a review of your printer with Brother technical support if none of the above works: If you have tried everything, followed all the solutions we have indicated, and the problem persists and you have not been able to resolve it, then it is best to leave the matter to the experts. Please call or visit Brother's technical service; we are confident that they will provide the appropriate solution to this problem.

In summary, the TS-07 error code on Brother printers occurs because the printer does not detect any router or access point with WPS enabled. This issue may arise because the printer is at an unfavorable distance from the router, there is a misconfiguration between devices, or the router, router, or access point simply does not have the WPS option. To solve it, in a nutshell, here's what you need to do:

• Restart the printer, router, or access point, and computer
• Bring the printer closer to the router or access point and avoid possible sources of interference
• Verify that the router or access point has WPS and that it is enabled
• Use another method of wireless connection to connect your printer
• Repeat all the above steps and make sure to follow everything to the letter if the problem persists
• Request a review of your printer with Brother technical support if none of the above works

And that's it for today! Thank you very much for reading this far; we hope we have been able to help you resolve the TS-07 error code affecting your Brother printer. Remember not to worry too much about this issue, as it is a very straightforward problem to solve. Good luck, and until next time!