Candy Washing machine Error L2

What is the fault of error L2 Candy affecting your washing machine?

If you have a Candy brand washing machine, you may have encountered the L2 error code on its display at some point. This code indicates a problem with the drainage of water from the drum, preventing the washing cycle from completing correctly. What does this mean, and how can you fix it? Stay with us and keep reading; we'll explain it in detail.

The L2 error code is triggered when the washing machine sensors detect that the water level in the drum is too high, indicating that the water is not draining as it should. This can be caused by various factors, such as:

• Dirty or clogged filter: The filter is a component located at the bottom of the washing machine, preventing foreign objects like coins, buttons, or lint from entering the drainage pump. If the filter is dirty or blocked by an object, water won't be able to exit the drum.
• Faulty drainage pump: The drainage pump is the small motor that propels water from the drum to the drainage pipe. If the pump is damaged or not receiving electrical power, it won't function, and water will remain in the drum.
• Blocked and clogged drainage pipe: The drainage pipe is the conduit or hoses through which water exits the washing machine to your home's general drainage. If the pipe is bent, crushed, or obstructed by residue, water won't flow, and it will accumulate in the drum.
• Dirty, misaligned, or damaged water level sensor: The water level sensor may be malfunctioning, so a brief inspection and maintenance should be done to rule out the need for replacement.

All these factors can cause the L2 error code to appear on the screen. However, there are solutions you can apply to fix this issue. Let's explore what they are!

How to fix error L2 in the Candy washing machine?

To resolve the L2 error code, you can follow the steps outlined below. Take note of each one and don't skip any. We've ordered them from the simplest to the most complex so that you can troubleshoot the issue on your own:

1. Restart your washing machine to refresh the sensors: Sometimes, the washing machine sensors may fail or provide inaccurate readings as false positives. To reset them, turn off the washing machine completely and disconnect it from the power source for a few minutes. Then, reconnect it and turn it on. Check if the L2 error code has disappeared, indicating that your washing machine can now drain water correctly.
2. Clean or replace the filter in your Candy washing machine: Open the filter cover, usually located on the front bottom of the washing machine. Remove the filter and clean it with water and soap. If you see any objects stuck, remove them carefully. If the filter is damaged, replace it with a new one. Put the filter back in place and close the cover.
3. Check for an obstruction in the drainage pump: The pump may be clogged by an object. To clean the pump, access the filter at the front bottom of the washing machine and carefully remove it. Check for any objects blocking the pump and remove them carefully. Then, reattach the filter. It's not necessary to apply much pressure when securing the filter and pump; making sure they are well fastened is sufficient.
4. Inspect the drainage hose in your Candy washing machine: The hose must be in good condition for proper water drainage. To inspect it, disconnect the washing machine from the power source and move it carefully to access the rear, where the hose is located. Then, disconnect the drainage hose and check that it is in good condition. Ensure there are no bends or crushes. If you find any damage to the hose, you'll need to replace it with a new one. If there is no visible damage, you can try blowing through the hose to rule out any internal blockage. You can also clean the hose with a wire by carefully inserting it from one end.
5. Check the water level sensor in your Candy washing machine: Use a multimeter and your knowledge of electronics for this task. It's possible that the water level sensor is not properly calibrated or is damaged and requires replacement. Check if this sensor is in perfect working condition; otherwise, you may need to replace it with a new one compatible with your Candy washing machine model.
6. Repeat all the previous steps and make sure to follow each one precisely: If the problem persists, conduct a second check of everything we've mentioned earlier. If the L2 error code persists, and the problem continues, there may be another issue with your washing machine that requires a more in-depth and thorough inspection by a professional.
7. Call Candy's technical support if no solution is found: If you can't resolve the L2 error code on your own, it's best to contact Candy's official technical support so that a qualified professional can inspect your washing machine and provide a definitive solution to this problem.

In summary, without a doubt, the L2 error code is another issue related to water drainage in your Candy washing machine. This could be due to a dirty or clogged filter, a faulty drainage pump, or a blocked drainage pipe. It could also be a damaged or misaligned sensor. To address this, as a summary, here are the steps you should take:

• Restart your washing machine to refresh the sensors.
• Clean or replace the filter in your Candy washing machine.
• Check for an obstruction in the drainage pump.
• Inspect the drainage hose in your Candy washing machine.
• Check the water level sensor in your Candy washing machine.
• Repeat all the previous steps and make sure to follow each one precisely.
• Call Candy's technical support if no solution is found.

Thank you very much for reading this far. We sincerely hope to have helped you resolve the L2 error code on your Candy washing machine. Remember that good preventive maintenance can help prevent (pun intended) such situations. Good luck and until next time!