Candy Washing machine Error E22

What is the fault of error E22 Candy that is affecting your washing machine?

If you have a Candy washing machine, you may have encountered the Error Code E22 on its display at some point. This code indicates that there is a problem with the drainage of the washing machine, preventing water from exiting properly and completing the washing cycle.

This issue can have various causes, ranging from a dirty filter to a potentially damaged pump. In this article, we will explain what the Error Code E22 means, outline its possible causes, and guide you through the step-by-step solution.

Here is a list of potential causes that may trigger the appearance of Error Code E22 on your Candy washing machine's display:

• An obstruction in the filter or pump of your washing machine: This could be due to the filter being blocked by foreign objects such as coins, buttons, or lint, or the pump being damaged or blocked by residue.
• Drain hoses in poor condition: It's also possible that the water outlet hoses are bent, crushed, or obstructed by external elements, hindering the free flow of water.
• A damaged water level sensor: Another possibility is that the water level sensor is defective or dirty, failing to accurately detect when the washing machine is empty.

Any of these causes can lead to the Candy washing machine stopping and displaying the Error Code E22 on its screen. If this happens, there's no need to worry because it can be resolved, and we'll explain the solution in detail.

How to fix error E22 on Candy washing machine?

To resolve Error Code E22, the first step is to disconnect the washing machine from the electrical power and shut off the water supply. Then, follow these steps outlined below:

1. Restart the washing machine to help refresh the sensors: The E22 error code might be a false positive caused by an electrical failure or a system overload. To rule out this possibility, restart the washing machine. Turn off your washing machine completely and disconnect it from the electrical outlet for a few minutes. Reconnect it, turn it on, and check if the E22 error code has disappeared.
2. Check for an obstruction in the drainage pump or its filter: If the problem persists, the pump may be obstructed or blocked by an object. It's advisable to check and clean both the pump and the filter. To clean the pump, access the filter located at the front bottom of the washing machine, carefully remove it, and check for any object blocking the pump. Reinsert the filter securely. It's not necessary to apply too much pressure when tightening the filter and pump; ensuring they are securely attached is sufficient.
3. Inspect the drainage hose of your washing machine: This hose must be in good working condition, without being crushed or torn. To inspect it, disconnect the washing machine from the electrical power and move it carefully to access the rear where the hose is located. Then, disconnect the drainage hose and check its condition. Ensure it's not bent, crushed by furniture, or pressed against the wall. If you find any damage to the hose, replace it with a new one. If there is no visible damage, try blowing through the hose to check for any internal blockage. You can also clean the hose with a wire by carefully inserting it into one of its ends.
4. Check the water level sensor of your Candy washing machine: Use a multimeter and your electronics knowledge for this task. It's possible that the water level sensor is not well calibrated or is entirely damaged and needs replacement. Check if this sensor is in perfect working condition; otherwise, you'll need to replace it with a new one compatible with your Candy washing machine model.
5. Repeat all the previous steps and ensure you follow everything to the letter: If the problem persists, perform a second check of everything mentioned earlier. If, after all checks and repairs, the E22 error code continues to appear, there may be another issue with your washing machine that requires a more in-depth and thorough inspection.
6. Call Candy's technical support if you cannot find a solution: If you're unable to resolve Error Code E22 on your own, it's best to contact Candy's official technical support for an expert to inspect your washing machine and provide a definitive solution.

In summary, concluding our brief advice guide: Error Code E22 indicates that the Candy washing machine is unable to drain water properly. This can be due to various causes such as a dirty filter, a faulty pump, clogged hoses, or a damaged water level sensor. To address it, follow these steps:

• Restart the washing machine to help refresh the sensors
• Check for obstruction in the drainage pump or its filter
• Inspect the drainage hose of your washing machine
• Check the water level sensor of your Candy washing machine
• Repeat all the previous steps and ensure you follow everything to the letter
• Call Candy's technical support if you cannot find a solution

We hope this article has been helpful, and you've successfully resolved Error Code E22 on your Candy washing machine. Remember that regular preventive maintenance is always the best option for taking care of your washing machine, avoiding such situations, and extending its lifespan. Good luck, and until next time!