Daewoo Washer machine error e4

What is the fault of error E4 Daewoo affecting your washing machine?

Oh no! Has an error appeared on your Daewoo washing machine and now you don't know what to do? The good news about this problem is that you've come to the right place to find a solution to this issue because today we're going to explain what this error means, what its possible causes are, and how you can solve it quickly and easily. Let's go!

The error code E4 on Daewoo washing machines indicates that there's a water leak problem in the washer, plain and simple. This fault can be due to several reasons, such as:

• A broken or improperly connected water inlet or outlet hose.
• A dirty or clogged water filter.
• A damaged or jammed water pump.
• A dirty, faulty, or misaligned water level sensor.

These are all the causes that can make the E4 error code appear on your Daewoo washer. But don't get discouraged because we have very good news for you, and that is that we've prepared a list of solutions you can apply to bid farewell to this problem once and for all.

How to fix the E4 error of the Daewoo washing machine?

To fix error code E4 on your Daewoo washer, simply follow these steps we're about to outline for you. Please take note of each one of them and don't skip any, pay attention to detail, and follow the steps we're going to provide to the letter:

1. Turn off and unplug your Daewoo washer from the power supply to reset and refresh its sensors: This is the first step you should always take when you have a problem with your washer, as sometimes it's just a specific glitch that can be resolved with a simple restart. To do this, completely turn off your washer and disconnect it from the power outlet, wait a few minutes, and then reconnect it. Turn on your washer and check if the E4 error code has disappeared.
2. Check the water inlet and outlet hoses on your Daewoo washer: If there's any type of water leakage or seepage, the E4 error code will appear on your Daewoo washer. Check that the hoses related to the water passing through your washer's entire circuit aren't broken, cracked, bent, or improperly connected. If necessary, replace damaged hoses or tighten connections. It's common for these hoses to crack over time, often due to the heat and humidity generated by the washer itself.
3. Clean the water filter on your Daewoo washer: A dirty filter can obstruct the free flow of water, causing it to stagnate and potentially overflow and leak through the water circuit. This filter is located at the bottom of the washer, behind a cover. Open the cover and carefully remove the filter. You can clean it with water and soap, using a soft-bristled brush, gently but firmly brush it to clean it while being careful not to damage or deform it. Remove any residue or dirt that may clog it and put the filter back in place, then close the cover.
4. Check the condition of the water pump on your Daewoo washer: A very dirty or clogged pump can obstruct the free flow of water, causing it to stagnate and potentially overflow and leak throughout the water circuit. The pump is responsible for pumping water in and out of the drum. If it's damaged or jammed, it can cause a water leak. To access the pump, you'll need to dismantle the back of the washer. Once you locate it, check that there are no foreign objects inside, such as coins, buttons, or lint that could jam its operation. If necessary, clean the pump with a damp cloth, and if you notice it's not functioning properly, then you'll need to replace it with a new one compatible with your washer model.
5. Check the operation of the water level sensor on your Daewoo washer: This sensor measures the amount of water in the drum and sends a signal to the PCB electronic board to start or stop the wash cycle. If the sensor is damaged or misaligned, it can send an erroneous signal and cause a water leak. To check the sensor, you'll need to use a multimeter and follow the user manual instructions. If the sensor is damaged, you'll need to replace it with a new one compatible with your washer model.
6. If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter: You may have overlooked some detail or not performed one of the steps correctly. That's why we recommend you go back and review everything you've done, but this time with more attention to detail and check that everything is in order. If the error still persists, proceed to the last step we have prepared for you.
7. Call a Daewoo technical service and request a home visit for a more thorough inspection: If you've done everything above and the E4 error code continues to appear on your Daewoo washer, then it means the problem is more serious than it seems and requires professional intervention. So, it's time to leave this problem in the hands of the experts. The electronic card may be damaged, or there may be some other defective component such as the motor. In that case, it's best to contact the official Daewoo technical service or a trusted technician and request a home visit for them to inspect your washer, provide an accurate diagnosis, and give you a quote for the repair.

In summary and to conclude for today, the E4 error code means there's a water leak in the Daewoo washer. The possible causes are: a broken or improperly connected hose, a clogged or dirty filter, a damaged or jammed water pump, or a faulty or misaligned sensor. The possible solutions to fix this problem are as follows:

• Turn off and unplug your Daewoo washer from the power supply to reset and refresh its sensors
• Check the water inlet and outlet hoses on your Daewoo washer
• Clean the water filter on your Daewoo washer
• Check the condition of the water pump on your Daewoo washer
• Check the operation of the water level sensor on your Daewoo washer
• If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter
• Call a Daewoo technical service and request a home visit for a more thorough inspection

And that's it! We hope we've helped you fix the E4 error code on your Daewoo washer. This type of problem can be easily fixed, so we encourage you to do it, you have nothing to worry about. Thank you very much for reading this far, Good luck and happy washing!