Daewoo Washer Machine Error E5

What is the failure of error E5 Daewoo affecting your washing machine?

As we all know, Daewoo is a globally recognized brand known for offering products of very good quality and durability over time. So if you have a Daewoo washing machine and you see the error code E5 on the screen, you don't have much to worry about. Today, we're going to explain what this error means, what its possible causes are, and how you can quickly and easily fix it.

The E5 error code on Daewoo washing machines indicates a high-voltage problem in the electrical supply of the washer. This can cause the washer to not work properly, shut off suddenly, or not turn on at all. It's a fairly common error and doesn't necessarily mean that your washer is malfunctioning or damaged.

It's important to know how to identify the causes of this error and how to apply the appropriate solutions to prevent further damage to your washer or your home's electrical installation. Below is a list of possible causes that may trigger the E5 error code on the screen:

• A voltage spike in the electrical network: This can occur due to a lightning storm, circuit overload, or poor electrical connection.
• A problem with the power cable or the washing machine's power outlet: There may be a short circuit, wear and tear, or a defect in any of these elements.
• A fault in the motor or the electronic PCB board of the washer: These are the parts that regulate the operation and power of the washer and are essential for its proper functioning, so they must be (without exception) in very good condition.

All of these causes can trigger the E5 error code on your Daewoo washer. But you don't have much to worry about because these causes are fixable and don't mean you have to replace your washer with a new one. Now, let's see what solutions you can apply to fix this problem.

How to fix error E5 on Daewoo washing machine?

We have prepared for you a list of possible solutions so that you can fix error code E5 on your Daewoo washing machine. Take note of each one of them and don't skip any, also make sure to follow all our instructions to the letter:

1. Turn off and disconnect from the power supply your Daewoo washing machine to reset and refresh its sensors: This is the first step you should always take when you have a problem with your washer, as sometimes it's just a temporary fault that can be resolved with a simple restart. To do this, turn off your washer completely and disconnect it from the electrical outlet, wait a few minutes, and reconnect it. Turn on your washer and check if the E5 error code has disappeared.
2. Use a good voltage regulator to stabilize the power supply to your Daewoo washing machine: Try using a good voltage regulator, preferably one that stabilizes for 3 minutes and can be configured to send the appropriate electrical voltage to your washer. It may be that the power supply in your home is very unstable and needs to be stabilized with a voltage regulator.
3. Check the power cable and the outlet where you connect your Daewoo washing machine: Make sure there is no visible damage, that they are properly connected, and that there is no moisture or dirt in these components. It often happens that the terminals of the outlets become sulfated over time and require preventive maintenance to continue working without problems. If you detect any problems, replace the cable or the outlet with a new one.
4. Ensure that the voltage of the electrical network is correct for your Daewoo washing machine: Consult the manufacturer's manual according to the model of your washer and make sure it is connected to a suitable and stable electrical network. If the electrical supply is too high or too low, it can affect the operation of the washer. In that case, it would be best to contact your power company or a professional electrician to solve the problem.
5. Check the motor and the electronic PCB board of your Daewoo washing machine: These are the most delicate and complex parts of the washer, so we do not recommend that you manipulate them if you do not have experience. If you suspect that there is a fault in the motor or the electronic PCB board, it would be best to leave the matter in the hands of experts unless you have advanced knowledge in electronics.
6. If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter: It is possible that you may have overlooked some detail or not carried out one of the steps correctly. That's why we recommend that you go over everything you have done, but this time with more attention to detail and make sure everything is in order. If the error still persists, move on to the last step we have prepared for you.
7. Call a Daewoo technical service and request a home visit for a more thorough inspection: If you have done everything above and the E5 error code still appears on your Daewoo washing machine, then it means that the problem is more serious than it seems and requires professional intervention. So, it's time to leave this problem in the hands of experts. The electronic board may be damaged, or there may be some other defective component such as the motor. In that case, it would be best to contact the official Daewoo technical service or a trusted technician and request a home visit to inspect your washer, provide an accurate diagnosis, and a repair quote.

In summary, the E5 error code means there is a high-voltage problem in the electrical supply of the Daewoo washing machine. The possible causes are: a voltage spike in the electrical network, a problem with the cable or the outlet where you connect your washer, or a fault in the motor or the electronic PCB board. The possible solutions to fix this problem are as follows:

• Turn off and disconnect from the power supply your Daewoo washing machine to reset and refresh its sensors
• Use a good voltage regulator to stabilize the power supply to your Daewoo washing machine
• Check the power cable and the outlet where you connect your Daewoo washing machine
• Ensure that the voltage of the electrical network is correct for your Daewoo washing machine
• Check the motor and the electronic PCB board of your Daewoo washing machine
• If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter
• Call a Daewoo technical service and request a home visit for a more thorough inspection

We hope this article has been very useful for you to be able to fix error code E5 on your Daewoo washing machine. Generally, this type of problem is easy to solve as long as it is indeed caused by a fault in the electrical supply. Good luck and happy washing!