Electrolux Dishwasher Error 10

What does error code 10 mean that is affecting your Electrolux dishwasher?

Has the error code 10 on your Electrolux dishwasher left you with dirty dishes? Solve this problem today without further delay! You are in the right place to learn all the causes that originate this problem and also the solutions you can apply to fix this issue. Let's go!

The error code 10 on Electrolux dishwashers indicates that there is a problem with the water supply. The equipment cannot fill with water correctly, which prevents the washing of your dishes and results in the error code 10 being displayed. But don't worry! Today we are going to guide you to know the causes and solutions to this problem, so you can enjoy your precious appliance again.

Before we start, we first need to know the causes that cause the error code 10 to appear on your Electrolux dishwasher:

• The shut-off valve is closed or partially open: The shut-off valve for the water feeding your dishwasher may be accidentally closed. It could also be partially open, so we recommend checking it.
• Very low water pressure and/or flow rate: The water pressure in your home may be insufficient for the proper operation of the dishwasher.
• A water supply disruption: There may be a disruption in the general water supply in your area.
• The water inlet filter is dirty and/or clogged: The inlet filter can become clogged with sediment or food debris if it has not been properly maintained.
• A dirty, clogged, or damaged water pump: The water pump is responsible for filling the dishwasher with water, and if it is not properly maintained, it may not function properly.
• A malfunction in the water level sensor: This sensor detects the water level in your dishwasher and sends a signal to the pump to stop when the correct level is reached. It may be sending an incorrect signal.
• A bent or twisted water inlet hose: The hose may be obstructed by a sharp bend or twist that impedes the flow of water.
• An incorrect connection of the water inlet hose: The hose may be improperly connected to the dishwasher or water supply.
• A problem with the water inlet valve: The valves may be damaged or clogged with sediment or minerals from the water supply.

As you can see, this error code 10 on Electrolux dishwashers can have many causes that need to be carefully examined if you want to find the solution. Now, let's see what solutions you could implement to solve this problem.

How am I going to be able to solve the error code 10 of your Electrolux dishwasher?

We have prepared a list of possible solutions to this error code 10 on Electrolux dishwashers for you. Practically, all of these solutions can be tried by yourself without the need to call a technician:

1. Restart your Electrolux dishwasher to attempt to reset its sensors: Let's start with the simplest and easiest thing you can do to try to solve this problem. Turn off your dishwasher completely and unplug it from the power outlet for a few minutes. After the time has passed (at least 15 minutes), reconnect your dishwasher and turn it on to see if error code 10 has disappeared. Sometimes, this might be enough to resolve the problem and clear the error code, as the sensors of your dishwasher are reset and recalibrated.
2. Check that the water tap is open and with good water pressure: Make sure this tap is fully open and has enough pressure. If necessary, adjust the valve or open the tap more to increase the water flow. The water supply must be smooth and constant for your dishwasher to work properly.
3. Clean the water inlet filter of your Electrolux dishwasher: Disconnect the water inlet hose from the tap and the dishwasher. Remove the filter at the end of the hose and clean it with a soft-bristled brush under running water; you can also use a bit of vinegar to remove impurities and odors. If you see that it is very dirty or damaged, you will need to replace it with a new one.
4. Checking the water pump is essential in every preventive maintenance of your dishwasher: Take the opportunity to check the pump that moves all the water through the entire circuit of your dishwasher; it may be clogged with food residues. Verify if it works correctly; otherwise, you will need to replace it with a new one compatible with your dishwasher model.
5. Clean the water level sensor of your Electrolux dishwasher: Locate the sensor at the bottom of the dishwasher's water tank. You can clean it with a bit of electronic cleaner to remove any dirt or soap residue that may interfere with its operation.
6. Check the water inlet hose: Ensure that this hose is not bent, crushed, or damaged. If so, straighten it or replace it with a new one. You can also check for leaks or drips in the hose and repair them if necessary.
7. Verify the water inlet valve of your Electrolux dishwasher: It may not be working correctly, so it would be best to check them. Locate the valve connected to the water inlet hose. Check if it is dirty, clogged, or damaged. If so, you have to clean it with a soft-bristled brush and a little vinegar or replace it with a new one.
8. Repeat all the previous steps if the problem persists: It wouldn't hurt to make second checks to make sure that you have done everything correctly. Make sure you have followed all the steps to the letter and have not overlooked anything. Check everything again for the second time and verify that everything is okay.
9. Go to Beko's technical support to solve the problem: If nothing you have tried has solved the problem on your own, the best thing in that case would be to contact Electrolux's technical service. They have the necessary tools to accurately diagnose the problem and provide you with a prompt and effective solution.

To summarize everything, we know that the error code 10 on Electrolux dishwashers can have various causes, and all of them are related to problems in the water supply; such as hoses, filters, valves, water pump, and even a closed shut-off valve. You can try to solve it yourself by following the steps mentioned above.

A small list of tips and advice so that error code 10 does not appear again in your Electrolux dishwasher

• Open the water tap before using the dishwasher.
• Check the water pressure in your home periodically.
• Clean the water inlet filter regularly.
• Do not use detergents that produce a lot of suds, as the suds could disturb the sensors.
• Perform general maintenance on your dishwasher at least once a year.

And that would be basically it! A problem that can be very easy to solve, since it is related to the water supply and not a failure as such of your dishwasher. You just have to take on the task of reviewing each and every one of the steps that we have mentioned. Good luck!