Electrolux Washer Machine Error F8

What does the error code F8 mean affecting your Electrolux washing machine?

Oh no! Is an F8 error code leaving you with wet clothes or simply leaving you unwashed? Today we're going to show you the solution to the F8 error code on Electrolux brand washing machines. Stay with us and keep reading, we'll show you the causes and solutions related to this problem.

The F8 error code on Electrolux washing machines indicates that there is a problem with the pressure switch or the wiring that connects it. The pressure switch is a sensor that measures the water level and sends a signal to the washing machine to stop when the appropriate level is reached. If the pressure switch or its wiring fails, the washing machine will not be able to control the water level and may overflow or not fill correctly.

These are the possible causes why the F8 error code may affect the operation of your Electrolux washing machine:

• Issues with the pressure switch of your washing machine: The pressure switch may be dirty, clogged in the hose that connects it, or it could also be disconnected, corroded, or simply damaged.
• Problems with the internal wiring of your washing machine: It often happens that rodents chew on the cables of your washing machine, either out of hunger or just for fun and to sharpen their teeth.
• Issues with the PCB electronic board of your washing machine: Although it may be rare and uncommon, the electronic board may also fail in these cases and display the F8 error code.

But you don't have much to worry about, because today we've prepared for you a list of possible solutions that you can apply to solve this problem. Let's take a look at them!

How can we fix the F8 error code on your Electrolux washing machine?

In order for you to continue using your washing machine normally, you need to resolve this problem. So, we're going to leave you here a list of solutions to the F8 error code on Electrolux washing machines:

1. Turn off and unplug your washing machine from the electrical outlet: This procedure often works well to solve the vast majority of errors. With this simple step, you'll be able to reset your washing machine's sensors. To do this, completely turn off your washing machine and unplug it from the outlet where it's connected for a few minutes. Once the time has passed (at least 5 minutes), plug it back in, turn it on, and check if the F8 error code has disappeared.
2. Check if there is any object obstructing the pressure switch of your washing machine: Please turn off your washing machine and unplug it before performing this procedure. Uncover the upper front panel of your washing machine so you can access the pressure switch. It's common for lint, clips, or coins to get stuck in the pressure switch hose, preventing it from functioning correctly. Take the opportunity to check the condition of this pressure switch and follow the steps we will indicate next.
3. Clean the pressure switch and perform preventive maintenance: The pressure switch may be dirty and unable to measure the water correctly. Disconnect it and perform a small preventive maintenance with electronic cleaner, and check the condition of the wiring from the pressure switch to the washing machine's electronic board. Also, ensure that the hose connected to the pressure switch is in good condition and not yellowed; make sure it's not blocked by any foreign object or lint from the washing machine itself. If you notice the hose is blocked, then you'll likely need to clean and/or replace both the hose and the filters of your washing machine.
4. Inspect the wiring of the pressure switch and ensure it's in good condition: If the wiring is damaged, it may be preventing the signal from the pressure switch from reaching your washing machine's electronic board. Make sure this wiring is not loose, cut, bitten, burnt, scorched, melted, or sulfated; in short, make sure it's in perfect condition. It's common for rodents to chew on these wires to sharpen their teeth or for fun to test your patience. Also, check the connections and ensure they are not sulfated. If you find sulfate on the connections or on the ends of the cables, you'll need to perform maintenance to remove all that sulfate that interferes with communication. Make the necessary repairs as appropriate; if you need to replace these cables with new ones, proceed with the procedure carefully.
5. Replace the pressure switch of your Electrolux washing machine and check the PCB electronic board: If you've reached this point and haven't been able to fix the problem, then you'll likely need to replace the pressure switch entirely along with the hose. Most likely, replacing this pressure switch will solve the issue. However, it could also be the case that the electronic board has damaged components, so if you have advanced knowledge in electronics and the appropriate tools, you could try repairing it yourself.
6. Call an Electrolux technical service and request a home visit for a more thorough inspection: If you've already tried everything we've described above and the problem with your washing machine persists, then our recommendation would be to have a professional inspect your washing machine. It might be time to call Electrolux technical support to have a technician sent to conduct a more thorough inspection of your washing machine. You're in very good hands!

To wrap up for today and to summarize: We've informed you that the F8 error code in Electrolux washing machines can have different causes and origins, but nevertheless, they are all related to the pressure switch. The most accurate solution would be to replace the pressure switch, but we recommend that before doing so, you thoroughly check the wiring of your washing machine because it's common for rodents to chew on the wires, leading to malfunctions.

You can try to solve this problem yourself by following the steps we've outlined earlier. But remember, if you're not successful, you can always contact an authorized Electrolux technical service for assistance from a qualified professional.

That's all for today, thank you very much for visiting us. We hope we've been of great help in fixing this issue affecting your Electrolux washing machine. Good luck and happy washing!