Fagor Washing machine Error f1

What does it mean when my Fagor washing machine shows this error on its display?

Hey! You know that Fagor brand washing machines have quite acceptable performance and efficiency, which is why you bought one. However, these types of appliances are not exempt from having faults during their operation, especially if they have not been properly maintained.

The error code f1 on Fagor brand washing machines indicates that there is a problem with the water supply. This problem may be frustrating for you, but there is no need to worry because the solution might be in your hands, and you might not need to call a technician to resolve it.

Today, we are going to explain the possible causes that can cause this fault to appear in your Fagor washing machine, as well as the different solutions you can apply to fix this problem. Here is a list of the possible causes of this problem in Fagor washing machines, along with a brief explanation of each one:

• A failure in the water supply: The water shut-off valve may be closed, or there may be low water pressure in the supply. Therefore, you will need to check that your water supply is indeed delivering water as it should, as indicated in the manufacturer's manual.
• Clogged or obstructed hoses: The inlet or outlet water hoses may be clogged with dirt or sediments from the minerals in the water. You will also need to check if these hoses are clear and if the water flows freely through them.
• Dirty or clogged filters: The washing machine's filters, such as the water inlet filter or the pump filter, may be dirty or clogged. These components are critical for circulating water throughout your washing machine, so they should be kept as clean as possible.
• Defective water inlet valves: The valves that control the flow of water into the washing machine may be faulty or clogged with dirt or sediments from your water supply.
• Problems with the water pump: The pump that drives the water inside the washing machine might be malfunctioning or could be dirty or clogged.
• A failure in the water level sensor: The sensor that detects the water level in your Fagor washing machine might be faulty or need maintenance, causing incorrect readings and sending false positives to the PCB electronic board.
• Problems with the PCB electronic board: The electronic board is a very important component for your washing machine; we could even say it is the "brain" of the machine, as it controls all the functions and instructions of the washing cycles.

All these causes are factors that can make your washing machine malfunction, and as you may have noticed, there are several. But let's see, step by step, what solutions we can apply to fix this problem so you can continue with your laundry day.

Can I find a solution to the error code F1 on my Fagor washing machine?

We have prepared a list of possible solutions for you to find the solution to the problem with your Fagor washing machine. Take note of each one and do not skip any of the steps we will leave for you below:

1. Turn off and unplug your Fagor washing machine from the electrical outlet to reset and refresh its sensors: It may be that your washing machine has a specific fault related to a misconfiguration, which is why the first step is to reset your Fagor washing machine. To do this, turn off your washing machine completely and unplug it from the electrical outlet, wait a few minutes, and then plug it back in. After the time has passed, turn on your washing machine and check if the fault has been resolved.
2. Check that the water shut-off valve is open and that there is enough water pressure: If the pressure is low or if you notice that the water flow is insufficient or scarce to supply your washing machine, then check the shut-off valve. You will need to check the manufacturer's manual to verify that the water pressure is adequate to supply your washing machine. Make sure the shut-off valve is fully open and verify again if the water supply is adequate for your washing machine.
3. Check the water inlet and outlet hoses that connect to your Fagor washing machine: Make sure these hoses are in good condition and have no leaks of any kind. Also, check the joints and connections that connect the water inlet and outlet to make sure they are not clogged with dirt or sediments. If the washing machine is new and you have just installed it, it is common to confuse the water inlet and outlet hoses and install them incorrectly. Check carefully that the water inlet hose is the one coming from the water supply and connects to the washing machine at the water inlet connection. Sometimes the hoses can become clogged with dirt or sediments from the water supply, so check if the hoses are clogged or replace them with new ones.
4. Clean the water filter of your Fagor washing machine: A dirty filter can obstruct the free flow of water, causing it to stagnate and potentially leak through the water circuit. This is definitely a problem that you need to resolve if it occurs. The filter is located at the bottom of the washing machine, behind a cover. Open the cover and carefully remove the filter for preventive maintenance. You can clean it with water, soap, and a bit of vinegar to disinfect it. Use a soft-bristle brush to help clean it, but make sure to handle it carefully to avoid damaging the filter mesh. Remove any residue or dirt that could obstruct it and replace the filter in its place, close the cover, and check if the error has disappeared from your washing machine.
5. Check the condition of the water pump in your Fagor washing machine: You need to perform the same procedure you did with the filter, but this time with the water circulation pump. This pump is responsible for driving water in and out of the drum. If it is damaged or clogged, it can cause a water leak or no water circulation at all, resulting in an error on the display. To access the pump, you will need to disassemble the back of the washing machine. Once you locate it, check that there are no foreign objects inside, such as coins, buttons, or lint that could clog its operation. If necessary, clean the pump with a damp cloth, and if you notice it is not functioning properly, you will need to replace it with a new one that is compatible with your washing machine model.
6. Check the operation of the water level sensor in your Fagor washing machine: This sensor is responsible for measuring the amount of water in the drum and sending a signal to the PCB electronic board to start or stop the washing cycle, and nothing more. If the sensor is damaged or uncalibrated, it can send an incorrect signal and cause a false positive error. To check the sensor, you will need to use a multimeter and have knowledge of electronics. If the sensor is damaged, you will need to replace it with a new one that is compatible with your washing machine model.
7. If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter: It is possible that you overlooked some detail or did not perform one of the steps correctly. Please review everything you have done, but this time with more attention to detail and ensure that everything is in order. If the error still is not resolved, then the fault is likely in the PCB electronic board of your Fagor washing machine, which will require a much deeper and more thorough inspection by a qualified technician.
8. Call a Fagor technical service and request a home visit for a more thorough inspection: If you have done all the previous steps and the error still appears on the display, then it means the problem is more serious than it seems and requires professional intervention. The PCB electronic board might be damaged, and if you do not have advanced knowledge in electronics, we recommend not touching it. In this case, it would be best to contact the official Fagor technical service or a trusted technician. Request a home visit for them to inspect your washing machine, provide an accurate diagnosis, and give you a repair estimate.

To summarize and conclude, the error code f1 on Fagor brand washing machines can be caused by various problems, all related to the water supply. You can try to fix it yourself by following the steps we have mentioned in this article.

Thank you for reading this far! We hope we have helped you find a solution for your washing machine and that your laundry day has not been interrupted for too long, as we know it is important to you. Good luck and happy washing!