Error F13 in Indesit tumble dryers

Why error F13 appears in Indesit tumble dryers

Error F13 in Indesit appliances is usually linked to a fault in temperature detection during drying. When this warning appears, the machine interprets that the thermal reading is not correct and, because of that, the drying process stops developing normally.

It is important to bear in mind that this code is associated with appliances that include a drying function, so it mainly fits washer-dryers. In practice, the most common situation is that the clothes come out less dry than expected, the cycle does not complete properly or the appliance shows the same warning again when the test is repeated.

The most common behaviours are usually these:

• The clothes come out damp after the programme
• The drying stage is interrupted before finishing
• The appliance does not dry with its usual efficiency
• The warning reappears when trying to use that function again

For that reason, this fault usually points more towards the thermal area of the drying process than to a problem with rotation, the door or basic panel operation.

What to do if F13 affects drying and when it is advisable to request assistance

If you see F13 on the display, the most reasonable thing to do is not to run several drying cycles one after another and to check whether the problem appears precisely when the appliance enters that stage. When the temperature reading is not correct, insisting many times does not usually solve the real cause.

1. Stop the programme and switch off the appliance
   • If the cycle is still active, stop it
   • It is not advisable to keep forcing the drying process if the warning always appears during that stage
2. Observe how the clothes come out
   • Check whether they come out damper than usual
   • Notice whether the programme stops before time
   • That detail helps quite a lot when identifying the problem
3. Take into account what type of appliance it appears on
   • This code fits appliances with a drying function
   • If your appliance only washes and does not dry, it is advisable to check the exact model carefully
4. Avoid repeating tests continuously
   • If the code returns every time, insisting does not usually provide any improvement
   • When the thermal detection of the drying process fails, the appliance usually records the same problem again
5. When it is advisable to request technical assistance
   • The clothes continue coming out damp repeatedly
   • The drying stage is interrupted with every attempt
   • The error appears again and again

   At that point, the most useful thing is to indicate the exact F13 code so that the inspection is focused from the start on the drying system and the associated temperature detection

If F13 appears only once and does not return, it could be a one-off issue. But if it repeats, the most sensible approach is to check the thermal area of the drying process thoroughly in order to locate the real origin of the problem and prevent the appliance from continuing to leave the clothes damp.