Error F13 in Indesit washing machines

What error F13 usually indicates on an Indesit washing machine

Error F13 in Indesit appliances is usually related to a temperature detection fault during drying. It is a code associated with appliances that have a drying function, so it is normally considered in washer-dryers and not in washing machines without drying.

In this type of situation, it is common to notice one of the following symptoms:

• The machine washes, but does not dry the clothes properly
• The drying phase stops or does not finish as it should
• The programme with drying does not progress normally
• The code appears again when trying to use that function once more

As this warning is linked to the drying phase, it should not be interpreted as a simple washing, drainage or door locking fault. The most sensible approach is to treat it as an issue in the thermal control of the drying system and bear in mind that, if it keeps appearing, a technical inspection will normally be required.

How to proceed with F13 and what to do if it appears again

If you see F13, the most useful thing is to check whether the problem appears just when using the drying function. With this code, the important thing is not to keep trying full cycles again and again, but to identify that the machine is failing specifically in the drying section.

1. Stop the cycle and switch off the appliance
   • If the programme is still running, stop the machine
   • It is not advisable to keep forcing the drying function if the error always appears during that phase
2. Check when the code appears
   • See whether the fault appears when the appliance enters the drying phase
   • Observe whether the clothes come out undried or the cycle is interrupted
   • This behaviour helps to narrow down the fault more accurately
3. Bear in mind that this code does not usually apply to washing machines without drying
   • If your appliance does not have a drying function, it is advisable to check the exact model carefully
   • F13 is associated with appliances that do dry
4. Do not run several attempts one after another
   • If F13 reappears each time, insisting will not usually solve it
   • When temperature detection during drying fails, the machine will continue to detect it
5. When it is advisable to call the service centre or a technician
   • The washer-dryer does not dry the clothes normally
   • Error code F13 appears repeatedly
   • The drying phase stops or does not complete

   In that case, the most useful thing is to indicate the exact F13 code so the inspection can be focused from the start on the drying system and the related temperature detection

If your Indesit appliance shows F13 repeatedly, there is most likely a real issue in the thermal part of the drying system. In that scenario, the most effective solution is usually a properly focused technical inspection to locate the cause of the problem.