Panasonic Air-conditioner Error h97

What is the meaning of this fault of Panasonic air conditioner?

A fault that can be somewhat easy to fix! Have you encountered the h97 error code on your Panasonic air conditioner? If so, don't worry, in this article we will explain what this error means, what its possible causes are, and how you can solve it definitively.

This fault that occurs in Panasonic air conditioners indicates that there is a problem with the fan motor. The fan is responsible for distributing cold air throughout the room, so if it doesn't work properly, the performance and efficiency of the unit are affected.

Basically, this problem tells you that there are issues with the fan of your air conditioner. Whether it's due to a fault in the fan itself, the wiring that connects it, the motor itself, or simply something blocking it, etc. This error can be due to several reasons, among which are the following:

• The fan of the outdoor unit is blocked: You may not have maintained this fan for a long time, and that's why it has ended up being blocked.
• A fault in the fan speed sensor: If the sensor is very dirty or in poor condition, it may prevent the motor from receiving the correct signal to operate.
• A fault in the motor capacitor: The capacitor may be failing and preventing the motor from starting or staying running.
• A fault in the wiring or electrical connections of the motor: Poor wiring or sulfated connections will prevent good communication between the components of your air conditioner.
• Wear or damage to the fan motor itself: After performing preventive maintenance, you will need to check if this motor is in good working condition.

All these causes can lead to this fault occurring in your Panasonic air conditioner. But don't worry, let's see how we could solve this whole situation that has you feeling hot at home.

How can the h97 error code of Panasonic air conditioner be fixed?

To fix this fault in your Panasonic air conditioner, you can follow the steps outlined below. Remember that if things get tough, you can always turn to an authorized Panasonic service technician to help you resolve this issue:

1. Turn off and unplug your Panasonic air conditioner from the power source to reset the sensors: Sometimes, this simple solution can fix the problem. We have nothing to lose by trying, so let's go for it. To do this, you need to completely turn off your air conditioner and unplug it from the power source for a few minutes. After about 15 minutes, plug it back in and wait for the voltage protector to indicate that you can turn it on again. Turn on your Panasonic air conditioner and check if the problem has been resolved.
2. Check your air conditioner's fan and make sure it can spin freely: Perhaps what your air conditioner needs is some good preventive maintenance and a little love to bring it back to life. You need to ensure that the fan is free of obstacles and clean of all dirt. Check that there are no obstructions, accumulated dust, or even dead animals that may be jamming its mechanism. If necessary, disassemble it and clean it thoroughly. This may be the fault causing the error code to appear on your air conditioner.
3. Check the fan speed sensor and make sure it's not dirty, loose, or damaged: It's possible that this speed sensor is not in good working condition, so we recommend thoroughly checking it with a multimeter and performing preventive maintenance if necessary. Clean it with a soft cloth dampened with electronic cleaner; do not use water for this procedure. If the sensor doesn't work, you'll need to replace it with a new one compatible with your Panasonic air conditioner model.
4. Check the motor capacitor and make sure it's not burnt or damaged: Use a multimeter and your super electronics knowledge to perform this task. The capacitor must be in perfect working condition. If necessary, replace it with a new one compatible with your air conditioner.
5. Check the wiring and electrical connections of the fan motor and the air conditioner in general: Check that the wiring and connections are not broken, loose, sulfated, or burnt. Depending on where you have the outdoor unit installed, it may happen that animals like rodents make their nests inside your air conditioner and chew on these cables. Repair or replace anything that may be interfering with the proper operation of your air conditioner. The wiring is what allows electrical communication between components, so it must be in good condition, without exception.
6. Check the fan motor and make sure it's not blocked, dirty, or damaged: The fan motor is a key component for the fan's rotation mechanism. If it doesn't work correctly, the air conditioner will show errors on the screen. Check this motor carefully and diagnose it using a multimeter to check its electrical connections and wiring. If it's very dirty, perform preventive maintenance with electronic cleaner and remove any sulfate buildup on the connections. Reassemble everything and check if the error has disappeared. If the problem persists, then you'll probably need to completely replace this motor.
7. If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter: We advise you to repeat everything we have mentioned before, but this time with more care and attention to detail. Make sure that during the maintenance process, you haven't left any cables disconnected or electrical connections not working. It may be necessary to perform several checks to solve this fault. If the problem still persists, then it may be time to leave the matter in the hands of air conditioning experts.
8. Call an authorized Panasonic service technician for a more thorough inspection: If none of the previous steps have worked, it's possible that the error is more complicated to solve and may require professional intervention to be repaired. Please call Panasonic technical support and arrange for a home visit to have your air conditioner checked. We're confident that they will give you an accurate diagnosis and proceed with the necessary repairs according to your needs.

In summary, the h97 error code means that there is a problem with the fan motor of the Panasonic air conditioner. It could be that something is obstructing the fan, so the possible causes are: a fault in the speed sensor, the capacitor, the wiring, or the motor itself. The possible solutions we recommend applying are the ones detailed in this guide.

And that's all for today! Unfortunately, you may have to replace the fan motor, as that seems to be the definitive solution to this problem. However, we encourage you to try everything mentioned above before reaching that conclusion. Ideally, you should perform a thorough maintenance on your Panasonic air conditioner and then check if you really need a motor replacement.

We hope this article has been helpful and that you have been able to fix this problem with your air conditioner. Thank you very much for reading this far and say goodbye to the heat once and for all. Good luck and until next time!