Siemens Washing Machine Error e11

What does this error on the Siemens washing machine screen mean?

Hey hey! Both you and I know that Siemens washing machines are of very good quality, especially because it's a brand allied with Bosch. Both brands have a very good reputation in the market, as they offer quality, performance, and efficiency that are quite acceptable. However, these types of appliances are not exempt from having faults during their operation.

The E11 error code on Siemens washing machines tells us that there is a problem with the water supply. This fault may be frustrating for you, but you have nothing to worry about because the solution may be in your hands, and you may not need to call or pay a technician to resolve this issue.

Today we will explain the possible causes that may cause this fault to occur in your Siemens washing machine:

• A water supply failure: The water inlet valve may be closed or there may be low pressure in the flow. You need to check that your Siemens washing machine is receiving water as it should and at the pressure indicated in the manufacturer's manual.
• Clogged hoses: The water inlet hoses may be clogged with dirt or sediment from minerals in the water. You also need to check if these hoses are clear and water flows freely through them.
• Dirty or clogged filter: Washing machine filters, such as the water inlet filter or the pump filter, may be dirty or clogged. These components are critical for circulating water throughout your washing machine, so they must always be clean.
• Defective water inlet valve: Valves that control the water flow may be damaged or clogged with dirt or sediment from the water supply.
• Issues with the water pump: The pump that moves water inside the washing machine may have a malfunction or may be dirty or clogged, causing water not to circulate properly and the washing machine to think the water supply is cut off or something similar.
• A failure in the water level sensor: The sensor that detects the water level in your Siemens washing machine may be damaged or lacking maintenance, causing it to have incorrect readings and send false positives to the washing machine.
• Issues with the PCB electronic board: The electronic board is a very important component for your washing machine, as it controls all the functions and cycle instructions. If this board has problems, it will display different errors on the screen.

All these causes are factors that can cause your Siemens washing machine to fail. Now, let's see what solutions we can apply to fix this problem so you can continue with your laundry day.

How can the E11 error on the Siemens washing machine be fixed?

We have prepared a list of possible solutions to find the solution to the problem with your Siemens washing machine. Do not skip any of the steps we are about to provide and we promise to find the solution:

1. Turn off and unplug your Siemens washing machine from the power to reset and refresh its sensors: Your washing machine may have a fault related to misconfiguration, so let's perform a reset of your Siemens washing machine. To do this, completely turn off your washing machine and unplug it from the power outlet, wait a few minutes (15), and plug it back in. After the time has passed, turn on your washing machine and check if the fault has been resolved.
2. Check that the water inlet valve is open and that there is sufficient water pressure: If the pressure is low or if you notice that the water flow is insufficient to supply your washing machine, then check the inlet valve. Check the Siemens manufacturer's manual to verify that the water pressure is adequate for your washing machine. Make sure the inlet valve is fully open and check again if the water supply is adequate for your washing machine. Once you have resolved this issue, check if the fault has disappeared from your washing machine.
3. Inspect the water inlet hoses of your Siemens washing machine: Check that these hoses are in good condition and do not have water leaks. Also, check the joints and connections that connect the water inlet and ensure they are free of dirt or sediment. Sometimes hoses tend to clog with dirt or sediment from the water supply, so check carefully if the hoses are clogged or replace them with new ones. Verify that the hoses are not inverted and are properly installed according to the Siemens manufacturer's manual. Check that the water inlet hose is the one coming from the water supply and connects to the washing machine at the water inlet connection.
4. Clean the water filter of your Siemens washing machine: A dirty filter can obstruct the free flow of water or cause it to stagnate, causing blockages or water leaks. This filter is located at the bottom of the washing machine, behind a cover. Open the cover and carefully remove the filter for preventive maintenance. You can clean it with water, soap, and use a bristle brush to clean it thoroughly, you can also use a little vinegar to disinfect it. Remove any residue or dirt that may obstruct it and replace the filter in place to close the cover and check if the fault has disappeared from your washing machine.
5. Check the condition of the water pump in your Siemens washing machine: The water pump, responsible for moving water in and out of the drum, may be causing the error in your washing machine. Follow the same procedure as with the filter, but this time on the pump. Disassemble the rear part of the washing machine, locate the pump, and check for any foreign objects (coins, buttons, lint) that may clog it. Clean it with a damp cloth. If it does not function properly, replace it with a new one compatible with your model.
6. Verify the operation of the water level sensor in your Siemens washing machine: This sensor measures the amount of water in the drum and sends a signal to the electronic board to start or stop the washing cycle. If it is damaged or misaligned, it may send an erroneous signal and cause the error on the screen. To check it, you need a multimeter and electronics knowledge. If it is damaged, replace it with a new one compatible with your model.
7. If the problem persists, please repeat all the previous steps and make sure to follow each one precisely: You may have overlooked a detail or performed a step incorrectly. Review everything you have done with more attention to detail and make sure everything is in order. If the error persists, the fault may be in the PCB electronic board of your Siemens washing machine, which requires a deeper inspection by a qualified technician.
8. Call a Siemens technical service and request a home visit for a more thorough inspection: If you have followed all the steps and the error persists, the problem is more serious and requires professional intervention. The PCB electronic board may be damaged. If you do not have advanced knowledge of electronics, do not touch it. Contact the official Siemens technical service or a trusted technician. Request a home visit to have your washing machine checked, receive an accurate diagnosis, and get a repair quote.

In summary and conclusion, the E11 error on Siemens washing machines may be caused by various problems related to the water supply. You can attempt to fix it yourself by following the steps described in this article. If the problem persists, call a qualified technician.

Thank you for reading this far! We hope this information has been helpful in solving this fault in your Siemens washing machine so you can resume washing your clothes without issues. Good luck and happy washing!