Select your language

Bauknecht Dishwasher Error f9

error f9 dishwasher bauknecht

What is the F9 Bauknecht fault affecting your dishwasher?

When you own a Bauknecht dishwasher, you automatically know you have a very high-quality product. However, these appliances are not immune to faults in their systems, especially when they haven't been given the proper maintenance.

The F9 error code on Bauknecht dishwashers indicates that the tank is overloaded with water and cannot empty it. There is a water drainage problem in the drain system of your dishwasher, which prevents the tank from emptying, and that's why you get this error.

If you want to continue using your appliance safely, then you will need to address this issue as soon as possible. Among the possible causes that can lead to this type of error, we have the following:

  • A dirty and clogged filter: This component of your dishwasher holds all the solid dirt that might be present on the dishes you're cleaning. If it's very dirty, it can cause a blockage in the entire drainage system of your dishwasher.
  • A broken or damaged filter: Filters can break due to an excess of sharp bones in meals, such as those from fish and/or chicken. If the protective mesh of these filters is in poor condition, then solids can go directly into the drain system of your dishwasher and clog everything.
  • A valve that doesn't function properly: There is a valve in the drain hose that prevents dirty water from returning to the dishwasher. If this valve is damaged, then it's very likely that dirty water will return, and that's why this error has occurred.
  • The drain pump is dirty or defective: This device pushes all the dirty water through the drain system to expel it from the dishwasher. If this pump is very dirty or damaged, then the F9 error code will appear on your dishwasher.
  • Crushed, broken, or deteriorated tubing: If the tubing is poorly installed or crushed by the dishwasher itself, by a wall, or by any other appliance, then the dirty water will not flow freely through the entire drain system.

How to fix the F9 error of the Bauknecht dishwasher?

To resolve the F9 error code on your Bauknecht dishwasher, you should follow the steps listed below. Take note of each one and don't overlook any of them:

  1. Restart the dishwasher: First, try restarting the dishwasher entirely. Turn it off and unplug it for a few minutes, then plug it back in and turn it on. Check if the error has cleared. This process resets the dishwasher's sensors. Also, keep in mind that using too much soap (creating a lot of foam) can trigger the sensors and generate false errors.
  2. Check and clean the drainage filter: Locate the dishwasher's filter, which is found inside at the bottom. Carefully remove it and check how dirty it might be. Gently clean it using a soft-bristled brush, warm water, and a bit of vinegar. Once it's clean, place it back in the dishwasher. If the filter is broken or in very poor condition, you'll need to replace it with a new one.
  3. Perform maintenance on the valves: Locate the dishwasher's valves and clean them with warm water and a bit of vinegar. These devices control the flow of water to and from the dishwasher.
  4. Check and clean the drain pump: If your dishwasher's pump is noisier than usual, you have a problem. You'll need to remove it and clean it carefully since it might have food residues or solids that bypassed the filter. If the pump is damaged or defective, replace it with a new one.
  5. Inspect the drainage tubing: This tube shouldn't be crushed against a wall, another appliance, or even by the dishwasher itself. The tubing also shouldn't be excessively bent, as this will block water flow through the dishwasher's drainage system.
  6. Review everything again: If you've checked all the above, it's worth ensuring you've followed each step precisely. If the problem persists, it might be time to leave it to the experts.
  7. Contact Bauknecht's technical support: If you haven't been able to resolve the F9 error code on your own, you should call Bauknecht's technical service for assistance.

In conclusion: The F9 error code on Bauknecht dishwashers indicates that water is stagnant and cannot be drained. The tank is filled with this dirty water, and the machine can't dispose of it. To address this issue, you would need to:

  • Try restarting the dishwasher
  • Inspect and clean the drain filter
  • Replace the drain filter if needed
  • Conduct preventive maintenance on the valves
  • Check and clean the drain pump
  • Replace the drain pump if necessary
  • Inspect the dishwasher's drainage tubing
  • Review everything again and follow the steps thoroughly
  • Call Bauknecht's technical service if the issue remains

¿Te ha servido este artículo? Por favor déjanos tu Voto