Baxiroca Boiler Error 119

What is the fault of error 119 Baxiroca affecting your boiler?

Are you experiencing issues with your Baxiroca boiler? Has the error code 119 appeared on the device's display and you're unsure how to address it? You're in the right place to understand the possible causes of this error code, as well as the solutions to eliminate it and continue using your boiler as if nothing happened.

The error code 119 on Baxiroca brand boilers indicates that the water pressure in the boiler is too low for it to operate correctly. It's a fault that might be easily fixable and one you might even be able to resolve on your own. Are you up for the challenge? Let's first look at the potential causes that might lead to this kind of malfunction in your Baxiroca boiler:

• A water valve that's closed or not fully open
• A water leak in the heating circuit or in the fill tap
• A loss of air in the expansion tank or in the safety valve
• An obstruction in the water inlet filter
• A fault in the pressure sensor or in the electronic board

How to fix error 119 of the Baxiroca boiler?

If you want to fix the issue with your Baxiroca boiler, you will need to conduct several checks to achieve this. We've provided a list of possible solutions you can apply yourself to fix the error code 119 on your boiler:

1. Restart the boiler by turning it off and on again: At times, this simple action can resolve the issue and restore the correct pressure. What you need to do is completely turn off the boiler and unplug it from the outlet for a few minutes. Plug it back in and turn it on. Now check if the error has disappeared.
2. Check the water supply going to your boiler: If the water valve is closed or not fully open, it can generate this error code on the boiler. Ensure the water supply is optimal, steady, and consistent so your boiler can utilize its full working potential.
3. Inspect for any water leaks: Check and look for visible leaks in the heating circuit or the water fill tap. If so, close the tap and repair the leak as soon as possible. You can also inspect the seals and check if they are dripping; if they are, please repair them as soon as possible.
4. Examine the condition of the expansion tank and safety valve: If they are damaged or misaligned, they might cause an air leak that reduces water pressure. In that case, replace the faulty parts or adjust the pressure of the tank according to the manufacturer's instructions.
5. Clean the water inlet filter: This filter can accumulate a lot of dirt, impeding water flow and reducing its pressure. To clean it, locate the filter inside the heater and carefully remove it. Clean it with warm water and a bit of vinegar, place it back, and check again if the error has disappeared.
6. Check the operation of the pressure sensor and electronic board: If any of these components are faulty for some reason, they will send a negative, incorrect, or erroneous signal to the system. To check and ensure these components are in optimal condition, you'll need a multimeter and an electrical schematic of the boiler.
7. Repeat all the previous steps if the issue persists: Sometimes, multiple tests might be needed to pinpoint the exact cause of the error and fix it permanently. Review everything we've outlined and ensure you follow each step carefully, perform secondary checks, and rule out all possible faults.
8. Contact Baxiroca technical support if you can't resolve the issue on your own: Perhaps it's time to leave it to the experts? Baxiroca has qualified professionals in the field. Call them and schedule an appointment for them to help you resolve the fault in your boiler. They have the necessary tools to accurately detect any issues your boiler might have and address them effectively.

In conclusion, the error code 119 on Baxiroca boilers indicates insufficient water pressure for the device to operate normally. Therefore, you'll need to do the following to solve the problem:

• Restart the boiler to reset the sensors
• Check the water supply
• Inspect for water leaks
• Review the expansion tank and safety valve
• Clean your boiler's filter
• Test the sensor and the board with a multimeter
• Repeat all steps if the issue persists and conduct secondary checks
• Contact Baxiroca's technical service if you couldn't solve the problem on your own

We hope this article has been helpful, and you've been able to address the issue with your Baxiroca boiler. Remember to follow all the steps carefully and ensure you make all possible checks. It's a problem that can be easily repaired, so you don't have much to worry about. See you soon!