Select your language

Baxiroca Boiler Error 155

error 155 boiler baxiroca

What is the fault of error 155 Baxiroca affecting your boiler?

Baxiroca brand boilers are very popular, especially in Spain. They are products that we can assure you are of very good quality. However, they are not exempt from experiencing issues related to poor installations and/or lack of maintenance. Like any appliance, it might have failures, and if you're encountering this error code, it's best to stick with us and keep reading, as we'll explore the causes and solutions for this problem.

The error code 155 in Baxiroca brand boilers indicates a communication failure between the boiler and the climate regulator. The climate regulator is a device that allows adjusting the water temperature and heating based on environmental conditions and user preferences. If this device doesn't communicate correctly with the boiler, the heater will not operate optimally and can result in excessive energy consumption or an inadequate water temperature.

Among the possible causes that can trigger error code 155 in Baxiroca boilers, we have the following:

  • A faulty or loose wiring between the boiler and the climate regulator: This can prevent the electrical signal from reaching properly and the boiler from receiving commands from the regulator.
  • An incorrect configuration of the climate regulator: If the regulator isn't set according to the manufacturer's specifications or based on the type of installation and/or climate of your area or time of year, it can create a conflict with the boiler, leading to error code 155.
  • A malfunction in the climate regulator or in the boiler's electronic board: If any of these components are damaged or malfunctioning, it can disrupt communication between them and cause this error in your boiler.
  • Lack of preventive maintenance: If the boiler is not in optimal conditions and up-to-date with maintenance, it can lead to these types of issues.
  • Fortunately for you, this type of fault is completely repairable, and in fact, fixing it is very easy and straightforward. You might try to solve this problem by yourself before calling technical support.

How to solve error 155 of the Baxiroca boiler?

Below, we'll provide the possible solutions you can try to fix the error code 155 on your Baxiroca boiler:

  1. Restart the boiler to reset the sensors: Sometimes, a simple restart can solve many electrical or electronic problems. To do this, simply disconnect the heater for a few minutes and reconnect it. Wait for the display to light up and check if the error code 155 has disappeared completely.
  2. Conduct a preventive maintenance: Every once in a while, it's good to show your boiler some love. Turn it off and disconnect it entirely! Perform preventive maintenance by removing all the dust that may be on its internal and external surfaces. Make use of an electronic component cleaner and spray a bit on all its components, connections, and wiring. Wait for it to dry and turn your boiler back on to see if the error has gone.
  3. Check the wiring between the boiler and the climate regulator: You need to ensure that the cables are well connected, clean, and undamaged. If you see any loose, broken, burnt, or charred cables, you will need to replace them with new ones without a doubt.
  4. Review the climate regulator's configuration: Refer to the manufacturer's instruction manual. There should be a specific section for the climate regulator, and make sure it's set correctly according to your boiler's model and type of installation. If you don't have the manual, you can find it on Baxiroca's official website.
  5. Check the condition of the climate regulator and the boiler's electronic board: If all the above has not worked, one of these components might be damaged or need repair. Utilize a multimeter and test the electronic continuity of the climate regulator. If you detect any failure in this component, you will most likely need to replace it with a new one.
  6. Repeat all the previous steps if the problem persists: If you have tried everything we have previously described, it wouldn't hurt to go over everything again. This time, make sure to follow everything to the letter. We know it might take some time, but we assure you it's worth it, all for the recovery of your appliance.
  7. Seek Baxiroca's technical support to address the issue: If none of the previous steps have helped you solve the problem, then your boiler might have a more severe and complicated issue than we anticipated. In that case, it would be best to leave the matter in the hands of a qualified professional expert. Call Baxiroca's technical service and schedule a technical visit. We are sure they will help you resolve this problem quickly, effectively, and safely.

To conclude, we're going to provide a brief yet comprehensive summary of everything you should do to resolve the error code 155 on the Baxiroca boiler:

  • Restart the heater
  • Check the wiring between the boiler and the climate regulator
  • Review the configuration of the climate regulator
  • Examine the condition of the climate regulator and the boiler's electronic board
  • Repeat all the previous steps if the problem continues
  • Seek Baxiroca's technical support to solve the problem

We genuinely hope we've been able to help with the problem you're experiencing with your boiler. Thank you so much for reading this far, and always remember to keep up with your boiler's maintenance to avoid these types of complications and prolong its lifespan. See you soon!

¿Te ha servido este artículo? Por favor déjanos tu Voto