Baxiroca Boiler Error e1

What is the fault of the E1 Baxiroca error affecting your boiler?

If the error code E1 appears on the screen of your Baxiroca boiler, then you're in the right place to find a solution. First and foremost, you should know that the error code E1 is very similar to the E01 error code, so the steps to take are almost identical to each other.

This E1 error code on Baxiroca boilers indicates that there is a problem with the ignition of the device. This fault might be related to the gas supply; there might be a leak in your home, so you need to pay proper attention to this issue and resolve it as soon as possible.

The Baxiroca Neodens 24/24F boiler models are also affected by this fault, as well as other more popular models like the Baxiroca Victoria 24/24F and Novanox 24/24F. So, if you have one of these models, it's essential that you stick with us, as we will explain the origins, causes, and solutions to this error code.

This fault prevents the flame that heats the water from being produced. If the boiler can't ignite, then you won't be able to enjoy hot water in your home. Among the possible causes that might result in this error code appearing on your boiler are the following:

• The gas supply is cut off or insufficient
• The ignition electrodes are dirty, worn, or poorly positioned
• The ionization probe is defective or poorly connected
• The boiler's electronic board is damaged or incorrectly configured

How to fix the E1 error of the Baxiroca boiler?

To resolve the E1 error code on Baxiroca boilers, you can follow these tips that we provide below:

1. Restart the boiler: Let's start by restarting the boiler to reset all of the sensors. Turn off your boiler and disconnect it from the electrical outlet for a few minutes. After waiting, reconnect it, turn it on, and check if the error has disappeared.
2. Check the gas supply: Ensure that you have an active and operational gas supply in your home. Make sure the gas valve or switch is fully open and that there's sufficient pressure to feed the boiler. If there's any problem with the gas supply, contact your provider to help resolve the issue.
3. Check for gas leaks: It's crucial to carefully inspect this step. If your gas supply is in good condition, then you shouldn't have any problems. However, if you have a gas leak in your home, you must address it immediately to prevent accidents.
4. Clean the ignition electrodes: Using a soft brush, clean the surface of the electrodes to remove any dirt or debris that might prevent their spark. Also, check and ensure the electrodes are properly aligned with each other according to the manufacturer's instructions.
5. Check the ionization probe: This device detects the presence of a flame. You need to inspect it and ensure it's in good condition and properly connected to the boiler. If the probe is broken or poorly connected, you should replace it with a new one.
6. Examine the boiler's electronic board: Use a multimeter to check the continuity of your boiler's electronic board. Ensure it's in good condition and properly configured. You can try resetting it to factory settings using the manufacturer's manual; this way, your boiler will start as if you had just bought it brand new.
7. Review all the previous steps if the problem persists: If needed, repeat all the steps and make sure to follow everything precisely. If after taking all these steps the E1 error code still appears, there might be another fault in the boiler, and you should seek a qualified professional to address the issue.
8. Seek Baxiroca's technical service to fix this issue with your boiler: If, after following all the steps described above, the problem persists, then it's time to leave it in the hands of the experts. And who better than Baxiroca's technical service? Give them a call, explain your situation, and we're confident they'll assist you in resolving this issue quickly, safely, and effectively.

We're going to provide a concise list of steps to resolve the E1 error code for Baxiroca boilers. In summary, this fault is due to a problem with igniting your boiler, which prevents the flame from lighting up. To address this, you should:

• Restart the boiler
• Check the gas supply
• Inspect for gas leaks in your home
• Clean the ignition electrodes
• Examine the ionization probe
• Inspect the boiler's electronic board
• Repeat the previous steps if the issue persists
• Contact Baxiroca's technical service if you couldn't fix the problem

We hope this article helps you understand and especially resolve the E1 error code on Baxiroca boilers. Remember, if the issue is due to a gas leak, address it promptly. It's crucial to ensure safety in your home to prevent catastrophic events like a fire. Remember to keep up with your boiler's preventive maintenance to prolong its lifespan and prevent such situations.