Error E16 Dishwasher Bosch

What is the failure of error E16 Bosch affecting your dishwasher?

If you have a Bosch dishwasher and the Error Code E16 appears on the screen, there's no need to panic. This code indicates an issue with the water flow in the dishwasher, preventing it from functioning correctly. In this article, we will explain what can cause this error and how you can easily resolve it.

The E16 error code occurs when the dishwasher is not receiving sufficient water or when water is not circulating adequately through the system. This can be due to various reasons, such as:

• The water supply is cut off or has low pressure.
• The dishwasher's filtration system is dirty or completely blocked.
• The filters, hoses, or pipes of the dishwasher are dirty, bent, crushed, or damaged.
• The dishwasher's water level sensor is faulty or dirty.

But you don't have to worry! This E16 error code on your dishwasher can have a quick and easy solution. Stay with us and keep reading; we'll explore possible solutions to correct it.

How to fix error E16 on your Bosch dishwasher?

The good news about this whole matter is that this E16 error code does not mean that your dishwasher has passed away, on the contrary, we can fix it. To solve the E16 error code in Bosch dishwashers, you can follow these steps below:

1. Restart the dishwasher to reset the sensors: This might be the easiest and simplest process of all. To do this, disconnect the dishwasher from the power outlet for a few minutes and then reconnect it. Now turn it on and check if the error has disappeared. This procedure resets the sensors and puts them back to their default values.
2. Check the water supply to your dishwasher: Ensure that the tap feeding the dishwasher is open and has enough pressure or sufficient water flow for the appliance to operate. If there is any valve or shut-off valve regulating the water flow, check that it is open and not blocked.
3. Clean the filtration system of the dishwasher: Remove the bottom filter of the dishwasher and clean it with warm water, a soft-bristle brush, a bit of vinegar, and soap. You can also clean the spray arm and the holes where water comes out with a soft brush or a toothpick. Reinstall the filter and the spray arm in their place.
4. Inspect the filters, hoses, and pipes of the dishwasher: Check for any leaks, breaks, bends, or dirt that might impede the water flow. If necessary, replace damaged parts or clean those that are dirty.
5. Check the water level sensor of the dishwasher: This sensor is located at the bottom of the dishwasher and detects the amount of water inside. If it's dirty or faulty, it can send an incorrect signal to the control panel and trigger the E16 error. Clean the sensor with a damp cloth or replace it if it's broken.
6. Repeat all the previous steps if the problem persists: Make sure to follow all the steps to the letter and leave nothing to chance or overlook anything. If after performing all checks and cleanings the E16 error code continues to appear, there might be some other more serious problem with the dishwasher that requires the intervention of an expert in the field.
7. Seek Bosch technical support to solve the problem: If you've been unable to resolve the E16 error code on your own, it's best to contact a qualified professional to inspect and repair your dishwasher if necessary. We are confident that Bosch's technical support will provide an accurate diagnosis of what might be happening with your dishwasher and offer an economical and guaranteed solution.

In summary and to conclude our brief guide of tips: The E16 error code in Bosch dishwashers indicates that there is a problem with the water flow in the appliance. The causes that can lead to this type of failure include issues with water supply, problems in the filtration system, filters, pipes, hoses, or the water level sensor.

To resolve the E16 error code in Bosch dishwashers, you can try the following steps:

• Restart the dishwasher to reset the sensors
• Check the water supply to your dishwasher
• Clean the filtration system of the dishwasher
• Inspect the filters, hoses, and pipes of the dishwasher
• Check the water level sensor of the dishwasher
• Repeat all the previous steps if the problem persists
• Seek Bosch technical support to solve the problem

That's all for today; thank you very much for reading this far. We hope you've been able to resolve the issue with your dishwasher. This type of failure typically occurs when the dishwasher has not received adequate maintenance, so be attentive to this situation and address the problem as soon as possible. Good luck and happy washing!