Candy Washing machine Error E03

What is the failure of error E03 Candy affecting your washing machine?

Hello there! Do you have a Candy brand washing machine, and the Error Code E03 has appeared on the screen? No need to worry, because today we will explain what this error means, its possible causes, and how you can find a quick, simple, and definitive solution.

The E03 error code on Candy washing machines indicates a problem with water drainage in the washer. This issue can be caused by several reasons, such as:

• The pump filter is clogged with foreign objects like coins, buttons, or lint.
• The drain hose of your washing machine is bent, crushed, or blocked by some residue.
• The drain pump is damaged or not functioning correctly.
• The water level sensor is damaged or may be very dirty.

All these reasons can trigger the Error Code E03 on your Candy washing machine. Please note that the E03 error code is synonymous with the E3 error code, so their causes and solutions are exactly the same. Now, let's explore the possible solutions you can apply to resolve this issue.

How to fix error E03 on your Candy washing machine?

These are some of the possible solutions that you can apply to resolve the E03 error code on your Candy washing machine:

1. Restart the washing machine to refresh the sensors: Turn off the washing machine completely and disconnect it from the power outlet, then wait a few minutes. Reconnect and turn it back on. Select a short washing program and check if the E03 error code has disappeared.
2. Clean the pump filter of your Candy washing machine: Open the filter cover, usually located at the bottom front of the washer. Remove the filter and check for any objects that may be obstructing it. Clean the filter with water and a soft-bristle brush, remove anything that could be affecting its operation, and then put it back in place.
3. Check the drainage hose of your Candy washing machine: Ensure that the hose is not bent, crushed, or blocked by any residue. If necessary, unscrew the hose from the washer to the drainage and clean the inside with a wire or by blowing forcefully from one end. Please make sure there is nothing blocking the water passage.
4. Inspect the drain pump of your Candy washing machine: If you have cleaned the filter and the hose, and the problem persists, the pump may be damaged or not working correctly due to an internal blockage. To access it, you will need to disassemble the back or bottom of the washer, depending on the model. Before doing so, disconnect the washing machine from the power and turn off the water supply. Once you have access to the pump, check if it rotates freely and if it makes any strange noise. If you find it damaged or blocked, you will need to replace this pump with a new one compatible with your Candy washing machine model.
5. Clean the water level sensor in your Candy washing machine: The water level sensor detects the amount of water in the drum and sends a signal to the electronic board to start or stop the washing cycle. If this sensor is damaged or dirty, it may send a wrong signal and trigger the E03 error code. Locate this sensor inside the washer, near the drum. It is usually a small piece with a thin tube connected to it. Disconnect the tube and blow through it to remove any obstruction it may have. Then, clean the sensor with a damp cloth and a soft-bristle brush, and reconnect it.
6. Repeat all the previous steps and make sure to follow everything carefully if the problem persists: Perform a second check of all the steps we have described. If, after following all the checks we have indicated, the E03 error code continues to appear, there may be another issue with your washing machine that requires a more in-depth and thorough examination.
7. Request a review of your washing machine from Candy's technical support: If you have tried everything and cannot solve the E03 error code on your own, it is best to contact Candy's official technical support so that a qualified expert can inspect your washing machine and provide an appropriate solution for your case.

In short, error code E03 means that there is a problem with the water evacuation of your Candy washing machine. Possible causes of this problem are: clogged filter, bent or clogged hose, damaged or clogged pump and/or a defective sensor. The possible solutions summarized to fix this problem would be the following:

• Restart the washing machine to refresh the sensors
• Clean the pump filter of your Candy washing machine
• Check the drain hose of your Candy washing machine
• Check the drain pump of your Candy washing machine
• Clean the water level sensor found in your Candy washing machine
• Repeat all the steps above and make sure to follow everything exactly if the problem persists
• Request a review of your washing machine with Candy technical support

And that would basically be it for today! We hope that this article has been useful to you and that you have been able to solve the error code E03 on your Candy washing machine. This is a fault that can be somewhat easy to solve, however, we always recommend that you keep your washing machine with good preventive maintenance and up to date to avoid this type of uncomfortable situations in your home. Good luck and happy washing!