Candy Washing machine Error E05

What is the fault of error E05 Candy affecting your washing machine?

Hello! If you're here, it's because your Candy washing machine is displaying the Error Code E05, and you're not sure what it means or how to fix it. There's not much to worry about; this problem has a solution. In this article, we'll explain everything you need to know about this type of error, its possible causes, and the most effective solutions.

The E05 error code on Candy washing machines indicates a problem with the temperature sensor and/or the heating element or resistor that heats the water. This can cause the washing machine to malfunction, prevent the water from reaching the desired temperature, or lead to damage in the components.

To prevent this error from becoming a major issue, it's essential to address it as soon as possible. Here's a list of the possible causes that may trigger the Error Code E05 on your Candy washing machine:

• The temperature sensor is defective or dirty: The temperature sensor measures the water temperature and sends the signal to the control panel. If the sensor is damaged or has accumulated dirt, it may provide inaccurate readings or not function at all.
• The heating element or resistor is damaged, broken, or burnt: The heating element or resistor is responsible for heating the water to the selected temperature. If the element is broken or burnt, it won't heat the water properly or may cause a short circuit in the system.
• The internal wiring of your washing machine or connectors is loose or damaged: The wiring and connectors facilitate communication between the temperature sensor, heating element, and control panel. If any of them are loose or damaged, it may interrupt data transmission or create a poor connection between components, sending erroneous signals to your washing machine.

Now that you know the possible causes that can trigger the Error Code E05 on your appliance, let's find out how to solve this problem.

How to fix error E05 on Candy washing machine?

We are going to leave you here a list of possible solutions so that you can fix the error code E05 in Candy brand washing machines:

1. Restart the washing machine to refresh the sensors: This is the simplest and quickest solution to try. Turn off the washing machine completely and unplug it from the power outlet, wait for a few minutes, then reconnect and turn it on. This will reset the sensors and clear any temporary error affecting your appliance. Turn on your washing machine and run a short wash cycle to check if the E05 error code has disappeared.
2. Check the temperature sensor and clean it if necessary: To do this, access the temperature sensor, which is usually located at the back or bottom of the washing machine. Make sure to disconnect the washing machine from the power source before handling any components. Once you find the sensor, check if it's in good condition and if there's any sign of dirt. If so, clean it with a damp cloth and dry it thoroughly before reattaching it. Ensure its connections are in good condition before turning on your washing machine.
3. Check the heating element or resistor and replace it if necessary: For this procedure, you'll need a multimeter and electronics knowledge. Locate the heating element or resistor, usually situated at the bottom or front of the washing machine. Make sure to disconnect the washing machine from the power source before handling any components. Once you find the resistor, check if it's in good condition and if there's any sign of breakage or burning. If so, replace it with a new one of the same type and model.
4. Inspect the internal electrical wiring of the washing machine and also the connectors: Check all the wiring and connectors that connect the temperature sensor, heating element, and control panel. Please make sure to have the washing machine disconnected from the power source before handling any components. Once you locate the wiring and connectors, check if they are in good condition and if there's any sign of breakage, burning, or if they are loose or damaged. If so, you can attempt a repair yourself or leave it to the experts.
5. Repeat all the above steps and ensure to follow everything to the letter if the problem persists: Perform a second check of all the steps we've described above. If after carrying out all the checks we've indicated, the E05 error code continues to appear, there may be another issue with your washing machine that requires professional inspection.
6. Request a review of your washing machine with Candy technical support: If you've already tried everything mentioned above and can't resolve the E05 error code on your own, it's best to contact Candy's official technical service for a professional review of your washing machine and an effective solution.

In summary, and to conclude our advice guide: The E05 error code is due to a problem with the temperature sensor and/or the heating element or resistor that heats the water in your washing machine. Possible causes include a defective or dirty sensor, damaged resistor, or loose or damaged wiring or connectors. The possible solutions you can apply to fix this problem are as follows:

• Restart the washing machine to refresh the sensors
• Check the temperature sensor and clean it if necessary
• Check the heating element or resistor and replace it if necessary
• Inspect the internal electrical wiring of the washing machine and also the connectors
• Repeat all the above steps and ensure to follow everything to the letter if the problem persists
• Request a review of your washing machine with Candy technical support

And that's all for now! If you follow the steps to the letter, you're likely to find the solution to this problem. We hope we've been very helpful, and you've been able to resolve the E05 error code on your Candy washing machine. Until next time!