Candy Washing machine Error E07

What is the fault of error E07 Candy affecting your washing machine?

Do you have a Candy brand washing machine and the error code E07 has appeared on the screen? Don't worry, in this article, we will explain what this error might mean, what its possible causes are, and how you can solve it easily and quickly. Let's get started!

The error code E07 on Candy washing machines indicates that there is a problem with either the door lock or the washing machine motor. This can prevent the washing machine from functioning correctly or cause it to stop in the middle of a wash cycle. Below are some of the most common causes of this error code:

• The door is not properly closed or is blocked by an object: Sometimes, a piece of clothing may get stuck in the door mechanisms.
• The door lock is damaged or faulty: If the door does not close properly or lock, it's possible that the lock is broken or worn out.
• The motor is overheated or has an electrical fault: If the motor overheats or experiences any issues with the wiring, it can trigger the E07 error code on your Candy washing machine.

All of these factors can lead to the appearance of the error code E07 on your Candy washing machine, so it's advisable to thoroughly check everything we've mentioned.

How to fix error E07 on Candy washing machine?

If you have already checked the possible causes and the error code E07 continues to appear on your Candy washing machine, you can try some of these solutions:

1. Restart the washing machine to refresh its sensors: Sometimes, the error may be caused by a temporary sensor failure. To resolve this, turn off your washing machine completely and disconnect it from the power outlet for a few minutes, then reconnect it. This may reset the sensors and make the E07 error code disappear.
2. Check if the door is properly closed and aligned with the washing machine frame: Ensure that there is no clothing or object preventing the correct closing of the door. If necessary, adjust the position of the door or the hinges to make it level with the frame and fit properly.
3. Inspect the latch and handle of your washing machine door: Check if they are broken, worn, or loose. If so, you will need to replace them with new ones according to your Candy washing machine model.
4. Examine the door seal of your Candy washing machine: This seal acts as a barrier between the interior and exterior of the washing machine, preventing water overflow in case of an accident and containing the steam from hot water cycles. This seal tends to deteriorate and/or wear out over time, especially with the heat generated by hot water wash cycles. It's advisable to check that this seal is well-fitted and can create a proper seal.
5. Check the wiring and connector of the door lock: Verify if they are properly connected, clean, and free of damage. If you see any loose, cut, burned, or slightly scorched wires, replace them with new ones or proceed with repair and/or cleaning.
6. Clean the filter and drainage pump of your Candy washing machine: Another possible cause of the E07 error code is a clogged pump filter due to foreign objects such as coins, buttons, or lint. This can prevent proper water drainage and overload the motor. Locate the filter and pump inside your washing machine and perform preventive maintenance on them.
7. Check the condition of the motor brushes of your washing machine: Brushes are components that make contact with the motor rotor and allow it to rotate. With use, brushes wear out and may stop functioning correctly. If the brushes are heavily worn or broken, replace them with new ones.
8. Repeat all the previous steps and make sure to follow each step precisely if the problem persists: If you have tried all the above solutions and the E07 error code continues to appear, there may be a more serious issue with your washing machine. In that case, we recommend carefully reviewing all the steps and checking if you missed something or did something incorrectly.
9. Request a check of your washing machine with Candy's technical support: If none of the above works, it is likely that your washing machine has a damaged or faulty component that requires professional repair. Contact Candy's official technical support and request a home visit for them to inspect your washing machine. They can diagnose the problem accurately and provide the most suitable solution for your case.

In summary, the E07 error code indicates that there is a problem with the door lock or motor of the Candy washing machine. To solve it, you can check some possible causes such as a poorly closed door, a damaged lock or an overheated motor. You can also try some solutions like:

• Restart the washing machine to refresh its sensors
• Check if the door is properly closed and aligned with the frame of the washing machine
• Inspect your washing machine's door latch and handle
• Check the rubber on the door of your Candy washing machine
• Check the door lock wiring and connector
• Clean the filter and drain pump of your Candy washing machine
• Check the condition of your washing machine's motor brushes
• Repeat all the steps above and make sure to follow everything exactly if the problem persists
• Request a review of your washing machine with Candy technical support

We hope that this article has been useful to you and that you have been able to solve the error code E07 on your Candy washing machine. If you liked it, please share it with your friends and family who also have a washing machine from this brand. Thanks for reading this far and happy washing!