Select your language

Candy Washing machine Error E09

error e09 washing machine candy

What is the fault of error E09 Candy affecting your washing machine?

Hello there! Is your Candy washing machine displaying the Error Code E09 on the screen? No need to worry – in this article, we'll definitively explain what this error means, its possible causes, and how to easily and quickly resolve it.

The E09 error code in Candy washing machines indicates that there's an issue with the electronic PCB board of your washing machine. This board controls all the functions of your appliance, from the start of the washing cycle to the final spin. If the board is damaged or defective, your washing machine won't operate correctly and will display the E09 error code.

The possible causes that trigger the E09 error code on your Candy washing machine are as follows:

  • A failure in the power supply: It could be a power outage, overload, or voltage fluctuation that has affected the electronic board.
  • A poor electrical connection or a loose cable: It's possible that one of the cables connecting the board to other components of the washing machine has come loose or is in poor condition, preventing the proper transmission of electrical signals.
  • A failure in the electronic PCB board: The board may have a burnt, broken, or worn-out component due to usage, causing it to malfunction or become unresponsive.

All these causes can lead to the appearance of the E09 error code on your Candy washing machine. While these issues might seem a bit complex to resolve, we'll provide you with a list of solutions to help fix this problem.

How to fix error E09 on Candy washing machine?

To resolve the E09 error code on your Candy washing machine, you can follow these steps outlined below:

  1. Restart the washing machine to refresh its sensors: Turn off the washing machine and disconnect it from the power outlet for a few minutes. Then, reconnect it and turn it on. This may cause the board to reset, clearing the error. Try a short washing cycle to see if the E09 error code has disappeared.
  2. Ensure you have an adequate power supply to your washing machine: Check and refer to the manufacturer's manual to ensure that the washing machine is receiving sufficient and necessary power to operate. Please note that the amperage of an outlet sometimes cannot withstand many devices connected at the same time. So, if you have multiple appliances connected to the same power outlet as your washing machine, disconnect them and check if the error code has disappeared.
  3. Check the connections and internal wiring of your washing machine: Open the back panel of the washing machine and ensure all cables are securely connected and in good condition. If you see any loose, broken, burned, or scorched cables, you'll need to replace them with new ones or adjust them as needed.
  4. Inspect the state of the electronic PCB board of your washing machine: If the previous steps haven't worked, the board may be damaged and need replacement. For this, you'll need to carefully remove it and examine it not only visually but also with the help of a multimeter to check the functionality of its components. If you notice any damaged components, you'll need to purchase a new electronic PCB board according to your Candy washing machine model and replace it.
  5. Repeat all the previous steps and ensure you follow everything precisely if the problem persists: If you've tried all the solutions described, and the E09 error code continues to appear, there may be a more serious problem with your washing machine. In that case, we recommend reviewing all the steps more carefully and ensuring you've done everything correctly.
  6. Request a review of your washing machine with Candy's technical support: If none of the above works, it's likely that your washing machine has a damaged or defective component that requires professional repair. Please contact Candy's official technical support and request a home visit for them to inspect your washing machine. We are confident that they will diagnose the problem with your washing machine accurately and offer an appropriate solution.

In conclusion, the E09 error code means that there's a problem with the electronic PCB board of your Candy washing machine. The possible causes are an electrical failure, poor connection, or a malfunction in the electronic PCB board. The possible solutions you can apply are summarized as follows:

  • Restart the washing machine to refresh its sensors
  • Ensure you have an adequate power supply to your washing machine
  • Check the connections and internal wiring of your washing machine
  • Inspect the state of the electronic PCB board of your washing machine
  • Repeat all the previous steps and ensure you follow everything precisely if the problem persists
  • Request a review of your washing machine with the technical support of Candy

We hope this article has been helpful, and you've been able to resolve the E09 error code on your Candy washing machine. This problem may be a bit challenging to fix if the issue is indeed with the electronic PCB board. However, we encourage you to persevere; we are confident that this problem has a solution. Good luck with fixing your washing machine!

¿Te ha servido este artículo? Por favor déjanos tu Voto